Home > Publications

print

Publications by Wim Van Paepegem


A1. Articles in international journals of the Science Citation Index (SCI)

[2001-1]

Van Paepegem, W., Degrieck, J. and De Baets, P. (2001). Finite Element Approach for Modelling Fatigue Damage in Fibre-reinforced Composite Materials. Composites Part B, 32(7), 575-588.
SCI-IF: 1.311, SCI subject category Materials Science, Composites, rank: 3/21. (.pdf)

[2001-2]

Van Paepegem, W. and Degrieck, J. (2001). Fatigue Degradation Modelling of Plain Woven Glass/epoxy Composites. Composites Part A, 32(10), 1433-1441.
SCI-IF: 1.662, SCI subject category Materials Science, Composites, rank: 2/21. (.pdf)

[2001-3]

Van Paepegem, W. and Degrieck, J. (2001). Experimental Setup for and Numerical Modelling of Bending Fatigue Experiments on Plain Woven Glass/epoxy Composites. Composite Structures, 51(1), 1-8.
SCI-IF: 1.116, SCI subject category Materials Science, Composites, rank: 4/21. (.pdf)

[2001-4]

Degrieck, J., Van Paepegem, W. and Boone, P. (2001). Application of digital phase-shift shadow Moire to micro deformation measurements of curved surfaces. Optics and Lasers in Engineering, 36(1), 29-40.
SCI-IF: 0.872, SCI subject category Optics, rank: 30/64. (.pdf)

[2002-5]

Van Paepegem, W. and Degrieck, J. (2002). Coupled Residual Stiffness and Strength Model for Fatigue of Fibre-reinforced Composite Materials. Composites Science and Technology, 62(5), 687-696.
SCI-IF: 2.171, SCI subject category Materials Science, Composites, rank: 1/21. (.pdf)

[2002-6]

Van Paepegem, W. and Degrieck, J. (2002). Effects of Load Sequence and Block Loading on the Fatigue Response of Fibre-reinforced Composites. Mechanics of Advanced Materials and Structures, 9(1), 19-35.
SCI-IF: 0.883, SCI subject category Materials Science, Characterization & Testing, rank: 7/29. (.pdf)

[2002-7]

Van Paepegem, W. and Degrieck, J. (2002). Tensile and Compressive Damage Coupling for Fully-reversed Bending Fatigue of Fibre-reinforced Composites. Fatigue and Fracture of Engineering Materials & Structures, 25(6), 547-562.
SCI-IF: 0.726, SCI subject category Engineering, Mechanical, rank: 41/107. (.pdf)

[2002-8]

Van Paepegem, W. and Degrieck, J. (2002). A New Coupled Approach of Residual Stiffness and Strength for Fatigue of Fibre-reinforced Composites. International Journal of Fatigue, 24(7), 747-762.
SCI-IF: 1.117, SCI subject category Engineering, Mechanical, rank: 17/107. (.pdf)

[2003-9]

Van Paepegem, W. and Degrieck, J. (2003). Calculation of Damage-dependent Directional Failure Indices from the Tsai-Wu Static Failure Criterion. Composites Science and Technology, 63(2), 305-310.
SCI-IF: 2.171, SCI subject category Materials Science, Composites, rank: 1/21. (.pdf)

[2003-10]

Van Paepegem, W. and Degrieck, J. (2003). Modelling damage and permanent strain in fibre-reinforced composites under in-plane fatigue loading. Composites Science and Technology, 63(5), 677-694.
SCI-IF: 2.171, SCI subject category Materials Science, Composites, rank: 1/21. (.pdf)

[2004-11]

Van Paepegem, W. and Degrieck, J. (2004). Simulating in-plane fatigue damage in woven glass fibre-reinforced composites subject to fully-reversed cyclic loading. Fatigue and Fracture of Engineering Materials & Structures, 27(12), 1197-1208.
SCI-IF: 0.726, SCI subject category Engineering, Mechanical, rank: 41/107. (.pdf)

[2005-12]

Van Paepegem, W., Dechaene, R. and Degrieck, J. (2005). Nonlinear correction to the bending stiffness of a damaged composite beam. Composite Structures, 67(3), 359-364.
SCI-IF: 1.116, SCI subject category Materials Science, Composites, rank: 4/21. (.pdf)

[2005-13]

Van Paepegem, W. and Degrieck, J. (2005). Simulating Damage and Permanent Strain in Composites under In-plane Fatigue Loading. Computers & Structures, 83(23-24), 1930-1942.
SCI-IF: 0.934, SCI subject category Engineering, Civil, rank: 16/89. (.pdf)

[2006-14]

Quintelier, J., Samyn, P., De Baets, P., Tuzolana, T., Van Paepegem, W., Van den Abeele, F. and Vermeulen, J. (2006). Wear behavior of carbon fiber-reinforced poly(phenylene sulfide). Polymer Composites, 27(1), 92-98.
SCI-IF: 1.058, SCI subject category Materials Science, Composites, rank: 5/21. (.pdf)

[2006-15]

Van Paepegem, W., De Geyter, K., Vanhooymissen, P. and Degrieck, J. (2006). Effect of friction on the hysteresis loops from three-point bending fatigue tests of fibre-reinforced composites. Composite Structures, 72(2), 212-217.
SCI-IF: 1.116, SCI subject category Materials Science, Composites, rank: 4/21. (.pdf)

[2006-16]

Samyn, P., Van Schepdael, L., Van Paepegem, W., Leendertz, J.S., Suister, E., De Baets, P. and Degrieck, J. (2006). Fracture assessment of carbon fibre/epoxy reinforcing rings through a combination of full-scale testing, small-scale testing and stress modelling. Applied Composite Materials, 13(2), 57-85.
SCI-IF: 0.520, SCI subject category Materials Science, Composites, rank: 12/21. (.pdf)

[2006-17]

Samyn, P., Van Schepdael, L., Leendertz, J.S., Gerber, A., Van Paepegem, W., De Baets, P. and Degrieck, J. (2006). Deformation of reinforced polymer bearing elements on full-scale compressive strength and creep tests under yielding conditions. Polymer Testing, 25(2), 230-245.
SCI-IF: 1.357, SCI subject category Materials Science, Characterization & Testing, rank: 2/29. (.pdf)

[2006-18]

Samyn, P., Van Schepdael, L., Leendertz, J.S., Gerber, A., Van Paepegem, W., De Baets, P. and Degrieck, J. (2006). Large scale friction and wear tests on a hybrid UHMWPE-pad / primer coating combination used as bearing element in an extremely high-loaded ball-joint. Tribology International, 39(8), 796-811.
SCI-IF: 1.025, SCI subject category Engineering, Mechanical, rank: 21/107. (.pdf)

[2006-19]

Van Paepegem, W., De Baere, I. and Degrieck, J. (2006). Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Part I: Experimental results. Composites Science and Technology, 66(10), 1455-1464.
SCI-IF: 2.171, SCI subject category Materials Science, Composites, rank: 1/21. (.pdf)

[2006-20]

Van Paepegem, W., De Baere, I. and Degrieck, J. (2006). Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Part II: Model development and finite element simulations. Composites Science and Technology , 66(10), 1465-1478.
SCI-IF: 2.171, SCI subject category Materials Science, Composites, rank: 1/21. (.pdf)

[2006-21]

Samyn, P., Van Paepegem, W., Leendertz, J.S., Gerber, A., Van Schepdael, L., Degrieck, J. and De Baets, P. (2006). Large-scale evaluation of constrained bearing elements made of thermosetting polyester resin and polyester fabric reinforcement. Journal of Tribology – Transactions of the ASME, 128(4), 681-696.
SCI-IF: 0.945, SCI subject category Engineering, Mechanical, rank: 25/107. (.pdf)

[2007-22]

Samyn, P., Van Schepdael, L., Leendertz, J.S., Gerber, A., Van Paepegem, W., Degrieck, J. and De Baets, P. (2007). Full-scale analysis of deformation and stress distribution for constrained composite bearing elements under compressive yielding conditions. Materials & Design, 28(9), 2450-2470.
SCI-IF: 1.028, SCI subject category Materials Science, Multidisciplinary, rank: 88/190. (.pdf)

[2007-23]

De Baere, I., Van Paepegem, W., Degrieck, J., Sol, H., Van Hemelrijck, D. and Petreli, A. (2007). Comparison of different identification techniques for measurement of quasi-zero Poisson's ratio of fabric reinforced laminates. Composites Part A, 38(9), 2047-2054.
SCI-IF: 1.662, SCI subject category Materials Science, Composites, rank: 2/21. (.pdf)

[2007-24]

Luyckx, G., De Waele, W., Degrieck, J., Van Paepegem, W., Vlekken, J., Vandamme, S. and Chah, K. (2007). Deformation Monitoring of Composite Structures: Three dimensional strain and temperature monitoring of composite laminates. INSIGHT, 49(1), 10-16 Jan 2007.
SCI-IF: 0.368, SCI subject category Materials Science, Characterization & testing, rank: 21/29. (.pdf)

[2007-25]

Van Paepegem, W., De Baere, I., Lamkanfi, E. and Degrieck, J. (2007). Poisson’s ratio as a sensitive indicator of (fatigue) damage in fibre-reinforced plastics. Fatigue and Fracture of Engineering Materials & Structures, 30(4), 269–276.
SCI-IF: 0.726, SCI subject category Engineering, Mechanical, rank: 41/107. (.pdf)

[2007-26]

Samyn, P., Van Schepdael, L., Leendertz, J.S., Van Paepegem, W., De Baets, P. and Degrieck, J. (2007). Short-beam-shear testing of carbon fibre/epoxy ring segments with variable cross-sectional geometry as a representative selection criterion for full-scale delamination. ASTM Journal of Testing and Evaluation, 35(3), 310-320.
SCI-IF: 0.231, SCI subject category Materials Science, Characterization & testing, rank: 26/29. (.pdf)

[2007-27]

Van Paepegem, W., Van Schepdael, L., Degrieck, J., Samyn, P., De Baets, P., Suister, E. and Leendertz, J.S. (2007). Fast characterization of carbon/epoxy rings for use in the ball-joints of the Maeslant storm surge barrier. Composite Structures, 78(3), 359-367.
SCI-IF: 1.116, SCI subject category Materials Science, Composites, rank: 4/21. (.pdf)

[2007-28]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2007). Finite element analysis of transmission of leaky Rayleigh waves at the extremity of a fluid-loaded thick plate. Journal of Applied Physics, 101(11), Art. No. 114907.
SCI-IF: 2.171, SCI subject category Physics, Applied, rank: 17/94. (.pdf)

[2007-29]

Van Paepegem, W., Degrieck, J., Samyn, P., De Baets, P., Van Schepdael, L., Suister, E. and Leendertz, J.S. (2007). Characterization of composites for use in the ball-joints of the Maeslant storm surge barrier. Polymer Composites, 28(4), 470-478.
SCI-IF: 1.058, SCI subject category Materials Science, Composites, rank: 5/21. (.pdf)

[2007-30]

De Baere, I., Voet, E., Van Paepegem, W., Vlekken, J., Cnudde, V., Masschaele, B. and Degrieck, J. (2007). Strain Monitoring in Thermoplastic Composites with Optical Fiber Sensors : embedding process, visualization with micro-tomography and fatigue results. Journal of Thermoplastic Composite Materials, 20(5), 453-472.
SCI-IF: 0.600, SCI subject category Materials Science, Composites, rank: 11/21. (.pdf)

[2007-31]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2007). The use of rivets for electrical resistance measurement on carbon fibre-reinforced thermoplastics. Smart Materials and Structures, 16(5), 1821-1828.
SCI-IF: 1.512, SCI subject category Instruments & Instrumentation, rank: 14/55. (.pdf)

[2007-32]

Samyn, P., Van Paepegem, W., Leendertz, J.S., Suister, E., Van Schepdael, L., Degrieck, J. and De Baets, P. (2007). Global analysis and constructional aspects in the redesign of bearing elements for a movable storm surge barrier. Engineering Structures, 29(10), 2673-2691.
SCI-IF: 0.986, SCI subject category Engineering, Civil, rank: 14/89. (.pdf)

[2008-33]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2008). Design of a modified three-rail shear test for shear fatigue of composites. Polymer Testing, 27(3), 346-359.
SCI-IF: 1.357, SCI subject category Materials Science, Characterization & Testing, rank: 2/29. (.pdf)

[2008-34]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2008). Design of mechanical clamps with extra long wedge grips for static and fatigue testing of composite materials in tension and compression. Experimental Techniques, 32(3), 62-69.
SCI-IF: 0.400, SCI subject category Engineering, Mechanical, rank: 66/107. (.pdf)

[2008-35]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2008). Comparison of the modified three-rail shear test and the [(+45,-45)]ns tensile test for pure shear fatigue loading of carbon fabric thermoplastics. Fatigue and Fracture of Engineering Materials & Structures, 31(6), 414-427.
SCI-IF: 0.726, SCI subject category Engineering, Mechanical, rank: 41/107. (.pdf)

[2008-36]

Van Paepegem, W., Shulev, A., Moentjens, A., Harizanova, J., Degrieck, J. and Sainov, V. (2008). Use of projection moire for measuring the instantaneous out-of-plane deflections of composite plates subject to bird strike. Optics and Lasers in Engineering, 46(7), 527-534.
SCI-IF: 0.872, SCI subject category Optics, rank: 30/64. (.pdf)

[2008-37]

Van Hemelrijck, D., Ramault, C., Makris, A., Lamkanfi, E., Van Paepegem, W. and Lecompte, D. (2008). Biaxial testing of fibre reinforced composite laminates. Proceedings of the Institution of Mechanical Engineers Part L – Journal of Materials – Design and applications, 222(L4), 231-239.
SCI-IF: 0.244, SCI subject category Materials Science, Multidisciplinary, rank: 166/190. (.pdf)

[2008-38]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2008). On the feasibility of a three-point bending setup for the validation of (fatigue) damage models for thin composite laminates. Polymer Composites, 29(10), 1067-1076.
SCI-IF: 1.058, SCI subject category Materials Science, Composites, rank: 5/21. (.pdf)

[2009-39]

De Baere, I., Luyckx, G., Voet, E., Van Paepegem, W. and Degrieck, J. (2009). On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions. Special Issue of Optics and Lasers in Engineering, 47(3-4), 403-411.
SCI-IF: 0.872, SCI subject category Optics, rank: 30/64. (.pdf)

[2009-40]

Van Paepegem, W., Shulev, A., Roussev, I., De Pauw, S., Degrieck, J. and Sainov, V. (2009). Study of the deformation characteristics of window security film by digital image correlation techniques. Special Issue of Optics and Lasers in Engineering, 47(3-4), 390-397.
SCI-IF: 0.872, SCI subject category Optics, rank: 30/64. (.pdf)

[2009-41]

De Baere I., Van Paepegem W. and Degrieck J. (2009). On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic. Part I: Influence of the sensor. Polymer Testing, 28(2), 196-203.
SCI-IF: 1.357, SCI subject category Materials Science, Characterization & Testing, rank: 2/29. (.pdf)

[2009-42]

De Baere I., Van Paepegem W. and Degrieck J. (2009). On the nonlinear evolution of the Poisson's ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic. Part II. Analytical explanation. Polymer Testing, 28(3), 324-330.
SCI-IF: 1.357, SCI subject category Materials Science, Characterization & Testing, rank: 2/29. (.pdf)

[2009-43]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2009). On the design of end tabs for quasi-static and fatigue testing of fibre-reinforced composites. Polymer Composites, 30(4), 381-390.
SCI-IF: 1.058, SCI subject category Materials Science, Composites, rank: 5/21. (.pdf)

[2009-44]

Blommaert, C., Van Paepegem, W. and Degrieck, J. (2009). Design of Composite Material for Cost Effective Large Scale Production of Components for Floating Offshore Structures. Special Issue of Plastics, Rubber and Composites: Macromolecular Engineering, 38(2-4), 146-152.
SCI-IF: 0.431, SCI subject category Materials Science, Composites, rank: 14/21. (.pdf)

[2009-45]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2009). Numerical study of Rayleigh wave transmission through an acoustic barrier. Journal of Applied Physics, 105(11), article number 114902.
SCI-IF: 2.171, SCI subject category Physics, Applied, rank: 17/94. (.pdf)

[2009-46]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2009). Comparison of different set-ups for fatigue testing of thin composite laminates in bending. Special Issue of International Journal of Fatigue, 31(6), 1095-1011.
SCI-IF: 1.117, SCI subject category Engineering, Mechanical, rank: 17/107. (.pdf)

[2009-47]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2009). Modelling the nonlinear shear stress-strain behaviour of a carbon fabric reinforced polyphenylene sulphide from rail shear and [(+45,-45)]4s tensile test. Polymer Composites, 30(7), 1016-1026.
SCI-IF: 1.058, SCI subject category Materials Science, Composites, rank: 5/21. (.pdf)

[2009-48]

De Backer G., Vantorre M., Beels C., De Pre J., Victor S., De Rouck J., Blommaert C. and Van Paepegem W. (2009). Experimental Investigation of Water Impact on Axisymmetric Bodies. Applied Ocean Research, 31(3), 143-156.
SCI-IF: 0.310, SCI subject category Engineering, Ocean, rank: 8/15. (.pdf)

[2009-49]

Rah, K., Van Paepegem, W., Habraken, A.M., de Sousa, R.A. and Valente, R.A.F. (2009). Evaluation of different advanced finite element concepts for detailed stress analysis of laminated composite structures. International Journal of Material Forming, 2(1), 943-947.

[2009-50]

Luyckx, G., Voet, E., Geernaert, T., Chah, K., Nasilowski, T., De Waele, W., Van Paepegem, W., Becker, M., Bartelt, H., Urbanczyk, W., Wojcik, J., Degrieck, J., Berghmans, F. and Thienpont, H. (2009). Response of FBGs in Micro-structured and Bow tie Fibers Embedded in Laminated Composite. IEEE Photonics Technology Letters, 21(18), 1290-1292.
SCI-IF: 2.173, SCI subject category Optics, rank: 12/64. (.pdf)

[2010-51]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2010). Electrical resistance measurement for in-situ monitoring of fatigue of carbon fabric composites. Special issue of International Journal of Fatigue, 32(1), 197-207.
SCI-IF: 1.117, SCI subject category Engineering, Mechanical, rank: 17/107. (.pdf)

[2010-52]

Van Paepegem, W., De Baere, I., Lamkanfi, E. and Degrieck, J. (2010). Monitoring quasi-static and cyclic fatigue damage in fibre-reinforced plastics by Poisson's ratio evolution. Special issue of International Journal of Fatigue, 32(1), 184-196.
SCI-IF: 1.117, SCI subject category Engineering, Mechanical, rank: 17/107. (.pdf)

[2010-53]

Degroote, J., Souto-Iglesias, A., Van Paepegem, W., Annerel, S., Bruggeman, P. and Vierendeels, J. (2010). Partitioned simulation of the interaction between an elastic structure and free surface flow. Computer Methods in Applied Mechanics and Engineering, 199(33-36), 2085-2098.
SCI-IF: 2.129, SCI-subject category Engineering, Multidisciplinary, rank: 7/67. (.pdf)

[2010-54]

Rezaei, A., Ost, W., Van Paepegem, W., Degrieck, J. and De Baets, P. (2010). Experimental Study and Numerical Simulation of the Large-Scale Testing of Polymeric Composite Journal Bearings: Two-Dimensional Modeling and Validation. Tribology Letters, 37(2), 261-272.
SCI-IF: 1.385, SCI subject category Engineering, Mechanical, rank: 24/105. (.pdf)

[2010-55]

Lamkanfi, E., Van Paepegem, W., Degrieck, J., Makris, A., Ramault, C. and Van Hemelrijck, D. (2010). Strain distribution in cruciform specimens subjected to biaxial loading conditions. Part 1: Two-dimensional versus three-dimensional finite element model. Polymer Testing, 29(1), 7-13.
SCI-IF: 1.357, SCI subject category Materials Science, Characterization & Testing, rank: 2/29. (.pdf)

[2010-56]

Lamkanfi, E., Van Paepegem, W., Degrieck, J., Makris, A., Ramault, C. and Van Hemelrijck, D. (2010). Strain distribution in cruciform specimens subjected to biaxial loading conditions. Part 2: Influence of geometrical discontinuities. Polymer Testing, 29(1), 132-138.
SCI-IF: 1.357, SCI subject category Materials Science, Characterization & Testing, rank: 2/29. (.pdf)

[2010-57]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Van Ackeren, J., Kakogiannis, D., Van Hemelrijck, D., Wastiels, J. and Vantomme, J. (2010). Experimental study on the axial crushing behaviour of pultruded composite tubes. Polymer Testing, 29(2), 224-234.
SCI-IF: 1.357, SCI subject category Materials Science, Characterization & Testing, rank: 2/29. Times cited: 0 (.pdf)

[2010-58]

Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2010). Shape optimisation of a biaxially loaded cruciform specimen. Polymer Testing, 29(2), 216-223.
SCI-IF: 1.357, SCI subject category Materials Science, Characterization & Testing, rank: 2/29. Times cited: 0 (.pdf)

[2010-59]

Cofaru, C., Philips, W. and Van Paepegem, W. (2010). Evaluation of digital image correlation techniques using realistic ground truth speckle images. Measurement Science and Technology, 21(5), article 055102.
SCI-IF: 1.493, SCI-subject category Instruments & Instrumentation, rank: 21/56. (.pdf)

[2010-60]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D., Wastiels, J. and Vantomme, J. (2010). Comparative study of the quasi-static energy absorption of small-scale composite tubes with different geometrical shapes for use in sacrificial cladding structures. Polymer Testing, 29(3), 381-396.
SCI-IF: 1.357, SCI subject category Materials Science, Characterization & Testing, rank: 2/29. Times cited: 0 (.pdf)

[2010-61]

Kakogiannis, D., Van Hemelrijck, D., Wastiels, J., Palanivelu, S., Van Paepegem, W., Vantomme, J., Kotzakolios, A. and Kostopoulos, V. (2010). Assessment of Pressure Waves Generated by Explosive Loading. CMES-Computer modeling in Engineering & Sciences, 65(1), 75-93.
SCI-IF: 4.785, SCI subject category Engineering, multidisciplinary, rank:2/67. (.pdf)

[2010-62]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D., Wastiels, J. and Vantomme, J. (2010). Parametric study of crushing parameters and failure patterns of pultruded composite tubes using cohesive elements and seam. Part I –Central delamination and triggering modelling. Polymer Testing, 29(6), 729-741.
SCI-IF: 1.667, SCI subject category Materials Science, Characterization & Testing, rank: 3/30. (.pdf)

[2010-63]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Van Ackeren, J., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D., and Vantomme, J. (2010). Parametric study of crushing parameters and failure patterns of pultruded composite tubes using cohesive elements and seam. Part II – Multiple delaminations and initial geometric imperfections. Polymer Testing, 29(7), 803-814.
SCI-IF: 1.667, SCI subject category Materials Science, Characterization & Testing, rank: 3/30. (.pdf)

[2010-64]

Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2010). An investigation of the mechanical behaviour of carbon epoxy cross ply cruciform specimens under biaxial loading. Polymer Composites, 31(9), 1554-1561.
SCI-IF: 1.058, SCI subject category Materials Science, Composites, rank: 5/21. Times cited: 0 (.pdf)

[2010-65]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2010). Comparison of the crushing performance of hollow and foam-filled small-scale composite tubes with different geometrical shapes for use in sacrificial cladding structures. Composites Part B: Engineering, 41(6), 434-445.
SCI-IF: 1.704, SCI subject category Materials Science, Composites, rank: 5/22. (.pdf)

[2010-66]

De Strycker, M., Schueremans, L., Van Paepegem, W. and Debruyne, D. (2010). Measuring the thermal expansion coefficient of tubular steel specimens with digital image correlation techniques. Optics and Lasers in Engineering, 48(10), 978-986.
SCI-IF: 1.262, SCI subject category Optics, rank: 27/70. (.pdf)

[2010-67]

Daggumati, S., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V. and Verpoest, I. (2010). Local damage in 5-harness satin weave composite under static tension: part I – experimental analysis. Composites Science and Technology, 70(13), 1926-1933.
SCI-IF: 2.901, SCI subject category Materials Science, Composites, rank: 1/22. (.pdf)

[2010-68]

Daggumati, S., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V. and Verpoest, I. (2010). Local damage in 5-harness satin weave composite under static tension: part II – Meso-FE modelling. Composites Science and Technology, 70(13), 1934-1941.
SCI-IF: 2.901, SCI subject category Materials Science, Composites, rank: 1/22. (.pdf)

[2010-69]

Cofaru, C., Philips, W. and Van Paepegem, W. (2010). Improved Newton-Raphson digital image correlation method for full-field displacement and strain calculation. Applied Optics, 49(33), 6472-6484.
SCI-IF: 1.707, SCI subject category Optics, rank: 23/78.

[2011-70]

Rezaei, A., Verhelst, R., Van Paepegem, W. and Degrieck, J. (2012). Finite element modeling and experimental study of oblique soccer ball bounce. Journal of Sports Sciences, 29(11), 1201-1213.
SCI-IF: 1.870, SCI subject category Sports Sciences, rank: 31/80.

[2011-71]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2011). Crushing and energy absorption performance of different geometrical shapes of small-scale glass/polyester composite tubes under quasi-static loading conditions. Composite Structures, 93(2), 992-1007.
SCI-IF: 2.036, SCI subject category Materials Science, Composites, rank: 3/24.

[2011-72]

Rah, K., Van Paepegem, W., Habraken, A.M. and Degrieck, J. (2011). A partial hybrid stress solid-shell element for the analysis of laminated composites. Computer Methods in Applied Mechanics and Engineering, 200(49-52), 3526-3539.
SCI-IF: 2.085, SCI subject category Engineering, Multidisciplinary, rank: 7/87.

[2011-73]

Rezaei, A., Ost, W., Van Paepegem, W., De Baets, P. and Degrieck, J. (2011). Experimental study and numerical simulation of the large scale testing of polymeric composite journal bearings: Threedimensional and dynamic modeling. Wear, 270(7-8), 431-438.
SCI-IF: 1.635, SCI subject category Engineering, Mechanical, rank: 18/122.

[2011-74]

Van Paepegem, W., Blommaert, C., De Baere, I., Degrieck, J., De Backer, G., De Rouck, J., Degroote, J., Vierendeels, J., Matthys, S. and Taerwe, L. (2011). Slamming wave impact of a composite buoy for wave energy applications: design and large scale testing. Polymer Composites, 32(5), 700-713.
SCI-IF: 0.998, SCI subject category Materials Science, Composites, rank: 7/24.

[2011-75]

Peirs, J., Verleysen, P., Van Paepegem, W. and Degrieck, J. (2011). Determining the stress-strain behaviour at large strains from high strain rate tensile and shear experiments. International Journal of Impact Engineering, 38(5), 406-415.
SCI-IF: 1.522, SCI subject category Engineering, Mechanical, rank: 22/122.

[2011-76]

Daggumati, S., Voet, E., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V. and Verpoest, I. (2011). Local strain in 5-harness satin weave composite under static tension: part I – experimental analysis. Composites Science and Technology, 71(8), 1171-1179.
SCI-IF: 2.863, SCI subject category Materials Science, Composites, rank: 1/24.

[2011-77]

Daggumati, S., Van Paepegem, W., Degrieck, J., Praet, T., Verhegghe, B., Xu, J., Ivanov, D.S., Lomov, S.V. and Verpoest, I. (2011). Local strain in 5-harness satin weave composite under static tension: part II – Meso-FE analysis. Composites Science and Technology, 71(9), 1217-1224.
SCI-IF: 2.863, SCI subject category Materials Science, Composites, rank: 1/24.

[2011-78]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Reymen, B., Ndambi, J.-M.., Vantomme, J., Kakogiannis, D., Wastiels, J. and Van Hemelrijck, D. (2011). Close-range blast loading on empty recyclable metal beverage cans for use in sacrificial cladding structure. Engineering Structures, 33(6), 1966-1987.
SCI-IF: 1.363, SCI subject category Engineering, Civil, rank: 21/115.

[2011-79]

De Strycker, M., Lava, P., Van Paepegem, W., Schueremans, L. and Debruyne, D. (2011). Measuring welding deformations with the Digital Image Correlation technique. Welding Journal, 90(6), 107S-112S.
SCI-IF: 0.545, SCI subject category Metallurgy & Metallurgical Engineering, rank: 32/76.

[2011-80]

Palanivelu, S., Van Paepegem, W., Degrieck, J., De Pauw, S., Vantomme, J., Wastiels, J., Kakogiannis, D. and Van Hemelrijck, D. (2011). Low velocity axial impact crushing performance of empty recyclable metal beverage cans. International Journal of Impact Engineering, 38(7), 622-636.
SCI-IF: 1.522, SCI subject category Engineering, Mechanical, rank: 22/122.

[2011-81]

De Baere, I., Van Paepegem, W., Quaresimin, M. and Degrieck, J. (2011). On the tension-tension fatigue behaviour of a carbon reinforced thermoplastic part I: limitations of the ASTM D3039/D3479 standard. Polymer Testing, 30(6), 625-632.
SCI-IF: 2.016, SCI subject category Materials Science, Characterization & Testing, rank: 2/32.

[2011-82]

De Baere, I., Van Paepegem, W., Hochard, C. and Degrieck, J. (2011). On the tension–tension fatigue behaviour of a carbon reinforced thermoplastic part II: Evaluation of a dumbbell-shaped specimen. Polymer Testing, 30(6), 663-672.
SCI-IF: 2.016, SCI subject category Materials Science, Characterization & Testing, rank: 2/32.

[2012-83]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2012) Comparison of Different Techniques for Strain Monitoring of a Biaxially Loaded Cruciform Specimen. Strain, 47(2), 210-217.
SCI-IF: 1.010, SCI subject category Materials Science, Characterization & Testing, rank: 7/32.

[2012-84]

Cofaru, C., Philips, W. and Van Paepegem, W. (2012). A novel speckle pattern - adaptive Digital Image Correlation approach with robust strain calculation. Optics and Lasers in Engineering, 50(2), 187-198.
SCI-IF: 1.576, SCI subject category Optics, rank: 29/78.

[2012-85]

Rah, K., Van Paepegem, W., Habraken, A.M. and Degrieck, J. (2012). A mixed solid-shell element for the analysis of laminated composites. International Journal for Numerical Methods in Engineering, 89(7), 805-828.
SCI-IF: 1.928, SCI subject category Engineering, Multidisciplinary, rank: 8/87.

[2012-86]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2012). Feasibility study of fusion bonding for carbon fabric reinforced polyphenylene sulphide by hot-tool welding. Journal of Thermoplastic Composite Materials, 25(2), 135-151.
SCI-IF: 0.865, SCI subject category Materials Science, Composites, rank: 9/24.

[2012-87]

De Baere, I., Jacques, S., Van Paepegem, W. and Degrieck, J. (2012). Study of the Mode I and Mode II interlaminar behaviour of a carbon fabric reinforced thermoplastic. Polymer Testing, 31(2), 322-332.
SCI-IF: 2.016, SCI subject category Materials Science, Characterization & Testing, rank: 2/32.

[2012-88]

Rezaei, A., Ost, W., Van Paepegem, W., De Baets, P. and Degrieck, J. (2012). A study on the effect of the clearance on the contact stresses and kinematics of polymeric composite journal bearings under reciprocating sliding conditions. Tribology International, 48, 8-14.
SCI-IF: 1.560, SCI subject category Engineering, Mechanical, rank: 21/122.

[2012-89]

Lyubenova, T., Stoykova, E., Ivanov, B., Van Paepegem, W., Degrieck, J. and Sainov, V. (2012). Full-field stress analysis by holographic phase-stepping implementation of the photoelastic-coating method. Physica Scripta, T149, article 014022.
SCI-IF: 0.985, SCI subject category Physics, Multidisciplinary, rank: 38/80.

[2012-90]

De Baere, I., Allaer, K., Jacques, S., Van Paepegem, W. and Degrieck, J. (2012). Interlaminar behaviour of infrared welded joints of carbon fabric reinforced polyphenylene sulphide. Polymer Composites, 33(7), 1105-1113.
SCI-IF: 0.998, SCI subject category Materials Science, Composites, rank: 7/24.

[2012-91]

Rezaei, A., Van Paepegem, W., De Baets, P. and Degrieck, J. (2012). Adaptive finite element simulation of wear evolution in radial sliding bearings. Wear, 296(1-2), 660-671.
SCI-IF: 1.635, SCI subject category Engineering, Mechanical, rank: 18/122.

[2012-92]

Cofaru, C., Philips, W. and Van Paepegem, W. (2012). A three-frame DIC method for the measurement of small displacements and strains. Measurement Science and Technology, 23(10), article 105406.
SCI-IF: 1.353, SCI subject category Engineering, Multidisciplinary, rank: 20/87.

[2012-93]

Rezaei, A., Rombouts, P., Van Paepegem, W., De Baets, P., Degrieck, J. and Weyten, L. (2012). Condition monitoring of laminated composite sliding bearings using embedded capacitors. Smart Materials and Structures, 21(10), Article 105022.
SCI-IF: 2.089, SCI subject category Instruments & Instrumentation, rank: 8/58.

[2013-94]

Rah, K., Van Paepegem, W. and Degrieck, J. (2012). An optimal versatile partial hybrid stress solid-shell element for the analysis of multilayer composites. International Journal for Numerical Methods in Engineering, 93(2), 201-223.
SCI-IF: 1.928, SCI subject category Engineering, Multidisciplinary, rank: 8/87.

[2013-95]

Van Nuffel, D., Vepa, K.S., De Baere, I., Degrieck, J., De Rouck, J. and Van Paepegem, W. (2012). Study on the parameters influencing the accuracy and reproducibility of dynamic pressure measurements at the surface of a rigid body during water impact. Accepted for Experimental Mechanics.
SCI-IF: 1.854, SCI subject category Materials Science, Characterization & Testing, rank: 4/32.

[2013-96]

Rah, K., Van Paepegem, W., Habraken, A.M., Degrieck, J., Alves de Sousa, R.J. and Valente, R.A.F. (2012). Optimal low-order fully integrated solid-shell elements. Accepted for Computational Mechanics.
SCI-IF: 1.831, SCI subject category Mathematics, Interdisciplinary applications, rank 12/93.

[2013-97]

Sukumaran, J., Ando, M., De Baets, P., Rodriguez Fereira, V., Szabadi, L., Kalacska, G. and Van Paepegem, W. (2012). Modelling gear contact with twin-disc setup. Accepted for Tribology International.
SCI-IF: 1.560, SCI subject category Engineering, Mechanical, rank: 21/122.

[2013-98]

Daggumati, S., De Baere, I., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V. and Verpoest, I. (2012). Fatigue and post-fatigue stress-strain analysis of a 5-harness satin weave carbon fibre-reinforced composite. Accepted for Composites Science and Technology.
SCI-IF: 2.863, SCI subject category Materials Science, Composites, rank: 1/24.

[2013-99]

Rah, K., Van Paepegem, W. and Degrieck, J. (2012). A novel versatile multilayer hybrid stress solid-shell element. Accepted for Computational Mechanics.
SCI-IF: 1.831, SCI subject category Mathematics, Interdisciplinary applications, rank 12/93.

[2013-100]

Lava, P., Van Paepegem, W., Coppieters, S., De Baere, I., Wang, Y. and Debruyne, D. (2013). Impact of lens distortions on strain measurements obtained with 2D digital image correlation. Accepted for Optics and Lasers in Engineering.
SCI-IF: 1.576, SCI subject category Optics, rank: 29/78.

[2013-101]

Nobre, J.P., Stiffel, J.-H., Nau, A., Outeiro, J.C., Batista, A.C., Van Paepegem, W. and Scholtes, B. (2013). Induced drilling strains in glass fibre reinforced epoxy composites. Accepted for CIRP Annals - Manufacturing Technology.
SCI-IF: 1.708, SCI subject category Engineering, Industrial, rank: 8/43.

[2013-102]

Nila, A., Vanlanduit, S., Vepa, S. and Van Paepegem, W. (2013). A PIV-Based Method for Estimating Slamming Loads During Water Entry of Rigid Bodies. Accepted for Measurement Science and Technology.
SCI-IF: 1.353, SCI subject category Engineering, Multidisciplinary, rank: 20/87.



P1. Articles in the ISI Proceedings

[2000-1]

Van Paepegem, W. and Degrieck, J. (2000). Experimental setup for the bending fatigue of fibre-reinforced composite materials. In: Bache, M.R. et al. (eds.). Proceedings of Fatigue 2000: Fatigue & Durability assessment of materials, components and structures. Cambridge, United Kingdom, 10-12 April 2000, Chameleon Press Ltd., p. 115-122.

[2000-2]

Van Paepegem, W. and Degrieck, J. (2000). Numerical modelling of fatigue degradation of fibre-reinforced composite materials. In: Topping, B.H.V. (ed.). Proceedings of the Fifth International Conference on Computational Structures Technology. Volume F: Computational Techniques for Materials, Composites and Composite Structures. Leuven, Belgium, 6-8 September 2000, Civil-Comp Press, p. 319-326.

[2006-3]

Luyckx, G., De Waele, W., Van Paepegem, W., Degrieck, J., Vlekken, J. and Chah, K. (2006). Measurement of multi-axial stress/strain in composite elements with Bragg sensors. Proceedings of the Third European Workshop on Structural Health Monitoring (EWSHM), July 5-7, 2006, Granada, Spain. p. 969-976.

[2006-4]

Sainov, V., Harizanova, J., Ossikovska, S., Van Paepegem, W., Degrieck, J. and Boone, P. (2005). Fatigue Detection of Fibres Reinforced Composite Materials by Fringes Projection and Speckle Shear Interferometry. Proceedings of the Fifth International Workshop FRINGE 2005, 11-14 September 2005, Stuttgart, Germany, p. 567-570.

[2006-5]

Sainov, V., Harizanova, J., Ossikovska, S., Van Paepegem, W., Degrieck, J. and Boone, P. (2005). Testing of Fibers Reinforced Composite Vessel by Fringes Projection and Speckle Shear Interferometry. Proceedings of the International Conference on Holography, Optical Recording and Processing of Information, 21-25 May 2005, Varna, Bulgaria. Article 625222 p. 1-6.

[2007-6]

Samyn, P., Quintelier, J., Van Paepegem, W. and De Waele, W. (2007). A relation between laboratory and full-scale testing of polyester/polyester composites under static and dynamic load. Proceedings of PRICM-6, 6th Pacific Rim International Conference on Advanced Materials and Processing, Jeju Island, Korea, 5-9 November 2007. p. 725-728.

[2007-7]

Luyckx, G., De Waele, W., Degrieck, J., Van Paepegem, W., Vlekken, J. and Verbeke, T. (2007). Feasibility study of an embedded Multi-Axial fibre bragg grating sensor. Proceedings of the SPIE Conference on Optical Sensing Technology and Applications, Prague, Czech Repubic, 16-18 April, 2007. p. U113-U122

[2007-8]

Shulev, A., Van Paepegem, W., Harizanova, J., Moentjens, A., Degrieck, J. and Sainov, V. (2007). Projection moiré measurement of the deflection of composite plates subject to bird strike impact. Optical Metrology 2007 – Optical Measurement Systems for Industrial Inspection, Munich, Germany, 18-22 June 2007. Article 66162Z p. 1-9.

[2007-9]

Taillaert, D., Van Paepegem, W., Vlekken, J. and Baets, R. (2007). A thin foil optical strain gage based on silicon-on-insulator microresonators. Proceedings of the Third European Workshop on Optical Fibre Sensors (EWOFS 2007), 4-6 July 2007, Napoli, Italy. p. 1-4.

[2008-10]

Cofaru, C., Philips, W. and Van Paepegem, W. (2008). Gradient-based optical flow for sub-pixel registration of speckle image sequences using a spatial/temporal postprocessing technique. Proceedings of the 2008 IEEE International Conference on Image Processing (ICIP), San Diego, California, U.S.A., October 12–15, 2008. p. 845-848.

[2008-11]

De Baere, I., Luyckx, G., Van Paepegem, W., Degrieck, J., Voet, E. and Vlekken, J. (2007). The use of optical fibres for fatigue testing of fibre-reinforced thermoplastics. Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007. p. 65-70.

[2008-12]

Luyckx, G., Degrieck, J., De Baere, I., De Waele, W., Van Paepegem, W. and Verbeke, T. (2007). Monitoring of a curved beam test structure using Bragg sensors and acoustic emission. Poster presentation – Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007. p. 59-64.

[2008-13]

Luyckx, G., Degrieck, J., De Waele, W., Van Paepegem, W., Vlekken, J. and Verbeke, T. (2007). Non-destructive evaluation of composite structures using an innovative Bragg sensor. Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007. p. 39-44.

[2008-14]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2007). Electrical resistance measurement on carbon fibre-reinforced thermoplastics with rivets as electrodes. Proceedings of the Fourth International Conference Emerging Techonologies in Non-Destructive Testing (ETNDT 4), Stuttgart, Germany, 2 – 4 april 2007. p. 269-274.

[2008-15]

Stoykova, E., Van Paepegem, W., De Pauw, S., Degrieck, J. and Sainov, V. (2008). Study of mechanical characteristics of window security films by phase-stepping photoelasticity. SPIE proceedings of the Fifteenth International School on Quantum Electronics "Laser Physics and Applications" (XV ISQE), 15-19 September 2008, Bourgas, Bulgaria. p. 1-11.

[2008-16]

Shulev, A., Van Paepegem, W., Stoykova, E., De Pauw, S., Degrieck, J. and Sainov, V. (2008). Projection moiré measurement of glass specimens retrofitted with safety film. SPIE proceedings of the Fifteenth International School on Quantum Electronics "Laser Physics and Applications" (XV ISQE), 15-19 September 2008, Bourgas, Bulgaria. p. 1-10.

[2008-17]

Cofaru, C., Philips, W. and Van Paepegem, W. (2008). Optical Flow Processing for Sub-pixel Registration of Speckle Image Sequences. Proceedings of the XXXI conference on Applications of Digital Image Processing, San Diego, California, U.S.A., August 11-14, 2008. p. 1-12.

[2009-18]

Shulev, A., Van Paepegem, W., De Pauw, S., Stoikova, E., Degrieck, J. and Sainov, V. (2009). Projection moiré measurement of glass specimens retrofitted with safety film. Proceedings of the 4th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2009), Antwerp, Belgium, 25-26 May 2009. p. 369-377.

[2009-19]

Stoykova, E., Van Paepegem, W., Minchev, G., Degrieck, J. and Sainov, V. (2009). Full field stress analysis of window security films by phase-stepping photoelasticity. Proceedings of the 4th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2009), Antwerp, Belgium, 25-26 May 2009. p. 327-337.

[2009-20]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2009). Application of various strain measuring techniques on a biaxially loaded cruciform composite specimen. Proceedings of the 4th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2009), Antwerp, Belgium, 25-26 May 2009. p. 275-285.

[2009-21]

Cofaru, C., Philips, W., Van Paepegem, W., Lava, P. and Debruyne, D. (2009). Generation of realistic ground truth images using Radial Basis Functions for the evaluation of DIC algorithms. Proceedings of the 4th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2009), Antwerp, Belgium, 25-26 May 2009. p. 111-119.

[2009-22]

Kakogiannis, D.A., Van Hemelrijck, D., Wastiels, J., Van Ackeren, J., Palanivelu, S., Van Paepegem, W., Vantomme, J. and Nurick, G.N. (2009). Experimental and numerical study of pultruded composite tubes under blast loading. Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009. p. 1677-1683.

[2009-23]

Palanivelu, S., Van Paepegem, W., Degrieck, J., De Wolf, K., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Numerical axial impact study of pultruded circular and square composite tubes. Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009. p. 771-777.

[2009-24]

Palanivelu, S., Van Paepegem, W., Degrieck, J., De Wolf, K., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Study of blast load on recyclable empty metal cans. Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009. p. 709-715.

[2009-25]

Palanivelu, S., De Pauw, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Validation of digital image correlation technique for impact loading applications. Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009. p. 373-379.

[2009-26]

Peirs, J., Verleysen, P., Van Paepegem, W. and Degrieck, J. (2009). Novel pure-shear sheet specimen geometry for dynamic material characterisation. Proceedings of the 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loadings (DYMAT 2009), Brussels, Belgium, 7-11 September 2009. p. 35-41.

[2009-27]

Luyckx, G., Voet, E., De Waele, W., Van Paepegem, W., Degrieck, J. and Vlekken, J. (2008). Strain monitoring of FRP elements using an embedded fibre optic sensor. Third International Conference on Smart Materials, Structures and Systems, Acireale, Italy, June 08-13, 2008 Advances in Science and Technology, Vol. 56, August 2008. p. 435-440.

[2010-28]

Cofaru, C., Philips, W. and Van Paepegem, W. (2010). Adaptive partitioning method in high resolution speckle imagery for sub-pixel digital image correlation. Proceedings of the 2010 International Conference on Image Processing (ICIP 2010), September 26-29, 2010, The Hong Kong Convention and Exhibition Centre, Hong Kong. p. 769-772.

[2010-29]

Xu, J., Lomov, S.V., Verpoest, I., Daggumati, S., Van Paepegem, W. and Degrieck, J. (2010). FE-Modeling of Damage of Twill Carbon/Epoxy Composite on Meso-Scale, Materials Characterization and Experimental Verification. Proceedings of the 10th International Conference on Textile Composites (TEXCOMP10), Lille, France, 26-28 October, 2010. p. 44-52.

[2010-30]

Daggumati, S., Voet, E., Van Paepegem, W., Degrieck, J., Praet, T., Verhegghe, B., Xu, J., Lomov, S.V. and Verpoest, I. (2010). Influence of the Internal Yarn Nesting (Shifting) on the Local Structural Response of a Satin Weave Composite-An Experimental and Numerical Overview. Proceedings of the 10th International Conference on Textile Composites (TEXCOMP10), Lille, France, 26-28 October, 2010. p. 238-247.

[2010-31]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2010). Composite material characterization through biaxial testing of cruciform specimens. Proceedings of the 14th International Conference on Experimental Mechanics (ICEM-14), July 4 -9, 2010, Poitiers, France. Article 16007, p. 1-2.

[2010-32]

Peirs, J., Verleysen, P., Van Paepegem, W. and Degrieck, J. (2010). Combined experimental and numerical approach for identification of dynamic material model parameters. Proceedings of the 14th International Conference on Experimental Mechanics (ICEM-14), July 4 -9, 2010, Poitiers, France. Article 18003, p. 1-8.

[2010-33]

De Baere I, Van Paepegem W. and Degrieck J. (2010). Fusion bonding of carbon fabric reinforced polyphenylene sulphide. Proceedings of the 14th International Conference on Experimental Mechanics (ICEM-14), July 4 -9, 2010, Poitiers, France. Article 08005, p. 1-8.

[2010-34]

Van Ackeren, J., Blom, J., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D., Palanivelu, S., Van Paepegem, W., Degrieck, J. and Vantomme, J. (2010). Strain rate effect on the mechanical behaviour of a textile reinforced cement composite. Proceedings of the International RILEM Conference on Material Science, Vol I: 2nd ICTRC Textile Reinforced Concrete, Aachen, Germany, 6-8 September 2010. p. 195-204.

[2010-35]

Voet, E., Luyckx, G., Degrieck, J. and Van Paepegem, W. (2011). Evaluation of the transversal strain state in a satin weave composite using fibre Bragg gratings. Proceedings of the 21st International Conference on Optical Fiber Sensors (OFS-21), 15-19 May 2011, Ottawa, Canada. Article 77530K.

[2010-36]

Nobre, J.P., Stiffel, J.H., Van Paepegem, W., Nau, A., Batista, A.C., Marques, M.J. and Scholtes, B. (2010). Quantifying the drilling effect during the application of incremental hole-drilling technique in laminate composites. Proceedings of the 8th European Conference on Residual Stresses (ECRS8), Riva del Garda, Italy, June 26-28, 2010. p. 510-515.

[2011-37]

Cofaru, C., Philips, W. and Van Paepegem, W. (2011). Dense and accurate motion and strain estimation in high resolution speckle images using an image-adaptive approach. Proceedings of SPIE Optics+Photonics, Volume 8135, article number 81351G, 21-25 August 2011, San Diego Convention Center, San Diego, California United States. p. 1-11.

[2011-38]

De Strycker, M., Van Paepegem, W., Schueremans, L. and Debruyne, D. (2011). The effect of residual stresses on the strain evolution during welding of thin-walled tubes. Proceedings of the 14th International Conference on Sheet Metal (SheMet 2011), 18-20 April 2011, Leuven, Belgium. p. 1-6.

[2011-39]

De Strycker, M., Lava, P., Van Paepegem, W., Schueremans, L. and Debruyne, D. (2011). Validation of welding simulations using thermal strains measured with DIC. Proceedings of the International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation (ISEV), 7-9 September 2011, The Royal College of Physicians, Edinburgh, United Kingdom. p. 1-6.

[2011-40]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Reymen, B., Ndambi, J.M., Segers, E., Vantomme, J., Van Ackeren, J., Kakogiannis, D., Wastiels, J. and Van Hemelrijck, D. (2011). Performance of sacrificial cladding structure made of empty recyclable metal beverage cans under large-scale air blast load. Proceedings of the Third International Workshop on Performance, Protection & Strengthening of Structures under Extreme Loading (Protect 2011), 30 August – 1 September 2011, Palazzo dei Congressi, Lugano, Italy. p. 416-421.

[2011-41]

Van Ackeren, J., Blom, J., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D., Palanivelu, S., Van Paepegem, W. and Vantomme, J. (2011). Applicability of composite Charpy impact method for strain hardening textile reinforced cementitious composites, Proceedings of the 2nd RILEM International conference on Strain Hardening Cementitious Composites (SHCC2-RIO), Rio De Janeiro, Brazil, 12-14 December 2011, p. 399-407

[2012-42]

Vanwalleghem, J., Mortier, F., De Baere, I., Loccufier, M. and Van Paepegem, W. (2012). Design of an instrumented bicycle for the evaluation of bicycle dynamics and its relation with the cyclist’s comfort. Proceedings of the 9th Conference of the International Sports Engineering Association (ISEA), 9-13 July 2012, Lowell, Masachussets, USA. p. 1-6.



A2. Articles in other international journals with peer review

[2001-1]

Degrieck, J. and Van Paepegem, W. (2001). Fatigue Damage Modelling of Fibre-Reinforced Composite Materials: Review. Applied Mechanics Reviews, 54(4), 279-300. (.pdf)

[2001-2]

Van Paepegem, W. and Degrieck, J. (2001). Modelling Strategies for Fatigue Damage Behaviour of Fibre-reinforced Composites. European Journal of Mechanical and Environmental Engineering, 46(4), 217-227. (.pdf)

[2001-3]

Van Paepegem, W. and Degrieck, J. (2001). Experimental and Numerical Investigation of Fatigue of Fibre-reinforced Composite Materials. Engineering Integrity - Journal of the Engineering Integrity Society, 9, 6-12.

[2001-4]

Van Paepegem, W. and Degrieck, J. (2001). Fatigue of Composites: Finite Element Implementation of Fatigue Degradation Models for Fibre-reinforced Composites. Composites in Manufacturing, 17(3), 1-6.

[2006-5]

Leendertz, H., Van Schepdael, L., Van Paepegem, W., Samyn, P., De Baets, P. and Degrieck, J. (2006). Anderung der gelenklagerkonstruktion des sturmflutsperrwerks bei Rotterdam. Stalhbau, 75 Heft 1 (Jan 2006), 45-54.

[2006-6]

Samyn, P., De Baets, P., Van Paepegem, W., Degrieck, J., Van Schepdael, L., Gerber, A. and Leendertz, J.S. (2006). Experimental Study of the Friction and Wear Behaviour of a Polymer Disc / Primer Coating Combination Used in Ball-Joints by Means of Large-Scale Testing. Tribotest, 12(2), 119-131.

[2008-7]

Luyckx, G., Voet, E., De Waele, W., Van Paepegem, W., Degrieck, J. and Vlekken, J. (2008). Strain monitoring of FRP elements using an embedded fibre optic sensor. Advances in Science and Technology, Vol. 56, August 2008.



B. Books and book chapters

[2002-1]

Van Paepegem, W. (2002). Development and finite element implementation of a damage model for fatigue of fibre-reinforced polymers. Ghent, Ghent University, 403 p. (ISBN 90-76714-13-4)
Order this book now for only 50 EUR (or 50 USD) !

[2007-2]

Van Paepegem, W., De Baere, I., Lamkanfi, E., Luyckx, G. and Degrieck, J. (2007). Numerical modelling of fatigue in textile polymer composites. In: Pavlou, D.G. (ed.). Computational & experimental analysis of damaged materials. Research Signpost, India (http://www.ressign.com/), 2007, pp. 39-75 (ISBN 978-81-7895-308-3).

[2008-3]

Van Paepegem, W., De Baere, I., Lamkanfi, E., Luyckx, G. and Degrieck, J. (2008). Research directions in the fatigue testing of polymer composites. In: Durand, L.P.. (ed.). Composite Materials Research Progress. Nova Science Publishers, Inc., New York, United States of America (http://www.novapublishers.com) (ISBN 1-60021-994-2).

[2009-4]

Van Paepegem, W. (2009). Fatigue damage in structural textile composites: testing and modelling strategies. In: Miraftab, M. (ed.). Fatigue Failure of Textile Fibres. Woodhead Publishing (http://www.woodheadpublishing.com/), United Kingdom, April 2009 (ISBN 978-1-84569-327-5).

[2009-5]

Van Paepegem, W. (2009). Mechanische karakterisering van vezelversterkte kunststoffen. In: De Moor, M. (ed.). Werken met innovatieve materialen: koudhardende kunststoffen (E: Working with innovative materials: cold curing plastics). Antilope Printing, Belgium (ISBN 978-9-08149-090-0).

[2010-6]

Van Paepegem, W. (2010). Fatigue damage modelling with the phenomenological residual stiffness approach. In: Vassilopoulos, A.P. (ed.). Fatigue life prediction of composites and composite structures. Woodhead Publishing (http://www.woodheadpublishing.com/), United Kingdom, July 2010 (ISBN 978-1-84569-525-5).

[2010-7]

Van Paepegem, W. (2010). Fatigue testing for polymer matrix composites. In: Guedes, R.M. (ed.). Creep and fatigue in polymer matrix composites. Woodhead Publishing (http://www.woodheadpublishing.com/), United Kingdom, November 2010, p. 461-491 (ISBN-13: 978 1 84569 656 6).

[2012-8]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2012). The in-plane shear behaviour of a carbon fabric reinforced thermoplastic under quasi-static and fatigue loading conditions. In: Columbus, F. (ed.). Fiber reinforced composites. Nova Science Publishers, Inc., New York, United States of America (http://www.novapublishers.com), pp.159-216 (ISBN-13: 978-1-61470-303-7).



C. Publications in conference proceedings

[2000-1]

Van Paepegem, W. and Degrieck, J. (2000). Fatigue Degradation Modelling of Plain Woven Glass/epoxy Composites. Proceedings of the Fifth International Conference on Textile Composites (TEXCOMP-5). Leuven, Belgium, 18-20 September 2000.

[2001-2]

Van Paepegem, W. and Degrieck, J. (2001). New Coupled Approach of Residual Stiffness and Strength for Fatigue of Fibre-reinforced Composites. Proceedings of the Eighth International Conference on Composites Engineering (ICCE/8). Tenerife, Spain, 5-11 August 2001, pp. 945-946.

[2002-3]

Van Paepegem, W. and Degrieck, J. (2002). Modelling single-sided and fully-reversed bending fatigue of fibre-reinforced composites. Proceedings of the Tenth European Conference on Composite Materials (ECCM-10). Brugge, Belgium, 3-7 June 2002.

[2002-4]

Van Paepegem, W. and Degrieck, J. (2002). Modelling of fatigue degradation of glass fabric/epoxy laminates. SAMPE Benelux meeting. Gent, Belgium, 29 October 2002. Invited presentation.

[2003-5]

Van Paepegem, W. and Degrieck, J. (2003). Simulating Damage and Permanent Strain in Composites under In-plane Fatigue Loading. Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing (CC03), Egmond-aan-Zee, The Netherlands, 2-4 September 2003.

[2004-6]

Van Paepegem, W. and Degrieck, J. (2004). Simulating Damage and Permanent Strain in Fibre-reinforced Composites under In-plane Fatigue Loading. Proceedings of the Eleventh European Conference on Composite Materials (ECCM-11), Rhodes, Greece, 31 May – 3 June 2004.

[2004-7]

Samyn, P., De Baets, P., Van Paepegem, W., Van Schepdael, L., Suister, E. and Leendertz, J.S. (2004). Design of a carbon/epoxy reinforcing ring reducing creep of UHMWPE in high-loaded sliding contacts. Proceedings of the Eighth International Conference on Tribology, Veszprem, Hungary, 1-4 June 2004, pp. 69-76.

[2004-8]

Sainov, V., Harizanova, J., Ossikovska, S., Van Paepegem, W. and Degrieck, J. (2004). Fatigue detection of fibre-reinforced composite materials by fringe projection interferometry. Proceedings of the Twelfth International Conference on Experimental Mechanics (ICEM-12), Bari, Italy, 29 August – 1 September 2004.

[2005-9]

Van Paepegem, W. (2005). Damage in composite materials: from phenomenology via analysis towards modelling. NIDAGROUP Workshop, 11 March 2005, Luxembourg. Invited presentation.

[2005-10]

Van den Abeele, F., Dechaene, R., Van Paepegem, W. and Degrieck, J. (2005). Numerical modelling of impact damage in composite materials. Third International Conference on Advanced Computational Methods in Engineering (ACOMEN), 30 May – 2 June 2005, Gent, Belgium.

[2005-11]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2005). Modelling the nonlinear shear stress-strain response of glass fibrereinforced composites. Third International Conference on Advanced Computational Methods in Engineering (ACOMEN), 30 May – 2 June 2005, Gent, Belgium.

[2005-12]

Sainov, V., Harizanova, J., Ossikovska, S., Van Paepegem, W., Degrieck, J. and Boone, P. (2005). Results from Bilateral Collaboration in Detection of Fibre Reinforced Composite Materials by Fringes Projection and Speckle Shear Interferometry. Second workshop of the Scientific Research Network "Optical Measurement Techniques for Structures and Systems" (OPTIMESS), 27 October 2005, Gent, Belgium.

[2005-13]

Luyckx, G., De Waele, W., Van Paepegem, W., Degrieck, J., Vlekken, J. and Chah, K. (2005). Theoretical study of the feasibility for discriminating axial and transverse stress/strain components with Bragg sensors. Second workshop of the Scientific Research Network "Optical Measurement Techniques for Structures and Systems" (OPTIMESS), 27 October 2005, Gent, Belgium.

[2005-14]

Quintelier, J., Samyn, P., De Baets, P. and Van Paepegem, W. (2005). Wear of steel against carbon fibre-reinforced PPS. BALKANTRIB ’05 5th International Conference on Tribology and 9th Yugoslav Conference on Tribology / Ed. Ivkovic , B. - Kragujevac : University of Kragujevac, Mechanical Engineering Faculty, 2005 - 845 p. - ISBN 86-80581-78-X p. 324-330. June 15 - 18, 2005, Kragujevac, Serbia.

[2005-15]

Samyn, P., Van Paepegem, W., De Baets, P., Degrieck, J., Leendertz, J.S., Suister, E. and Van Schepdael, L. (2005). Integrated design of highly loaded sliding surfaces on a huge ball-joint. World Tribology Congress III, Washington, September 12-16, 2005. Proceedings on CD-ROM.

[2006-16]

Van den Abeele, F., Van Paepegem, W. and Degrieck, J. (2006). Impact Damage Model for Fibre-Reinforced Composite Materials. Proceedings of the 7th National Congress on Theoretical and Applied Mechanics, May 29-30, 2006, Mons, Belgium.

[2006-17]

Degrieck, J. and Van Paepegem, W. (2006). Monitoring of Fatigue, Impact and Wear in Cetex TPC. Workshop on Cetex thermoplastic composites in honour of Willem van Dreumel. TUDelft, Delft, The Netherlands, 14 June 2006. Invited presentation.

[2006-18]

Luyckx, G., Degrieck, J., De Waele, W., Van Paepegem, W., Van Roosbroeck, J., Chah, K., Vlekken, J., McKenzie, I. and Obst, A. (2006). Feasibility study on measuring axial and transverse stress/strain components in composite materials using Bragg sensors. Proceedings of the 6th International Conference on Space Optics (ICSO 2006), June 27-30, Noordwijk, The Netherlands.

[2006-19]

Degrieck, J., Van Paepegem, W., Van Schepdael, L., Samyn, P., De Baets, P., Suister, E. and Leendertz, J.S. (2006). Characterization of composites for the Maeslant storm surge barrier. Proceedings of the 16th European Conference on Fracture (ECF16), Alexandroupolis, Greece, July 3-7, 2006. Invited presentation.

[2006-20]

Van Paepegem, W., Van Schepdael, L., Samyn, P., Leendertz, J.S., De Baets, P. and Degrieck, J. (2006). Reliable small-scale qualification tests for carbon/epoxy rings in the Maeslant storm surge barrier. Proceedings of the 12th European Conference on Composite Materials (ECCM-12). Biarritz, France, August 29 – September 1, 2006.

[2006-21]

Luyckx, G., De Waele, W., Degrieck, J., Van Paepegem, W., Vlekken, J. and Chah, K. (2006). Multi-axial Fiber Bragg sensors for monitoring purposes. Proceedings of the 12th European Conference on Composite Materials (ECCM-12). Biarritz, France, August 29 – September 1, 2006.

[2006-22]

Van den Abeele, F., Van Paepegem, W. and Degrieck, J. (2006). Experimental characterisation and numerical modelling of impact damage in fibre-reinforced composites. Proceedings of the 12th European Conference on Composite Materials (ECCM-12). Biarritz, France, August 29 – September 1, 2006.

[2006-23]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2006). Modelling the nonlinear shear stress-strain response of glass fibre-reinforced composites. Proceedings of the 12th European Conference on Composite Materials (ECCM-12). Biarritz, France, August 29 – September 1, 2006.

[2006-24]

Shulev, A., Van Paepegem, W., Roussev, I., De Pauw, S., Sainov, V. (2006). Optimization of Digital Speckle Photography for study of the tear resistance of window security film. Proceedings of the 9th International Conference on Laser & Laser Information Technologies (ILLA '2006), October 4-7, 2006, Plovdiv, Bulgaria.

[2006-25]

Luyckx, G., De Waele, W., Degrieck, J., Van Paepegem, W., Vlekken, J. and Chah, K. (2006). Fiber optic sensing system for discriminating multi-axial strain components in composite elements. Proceedings of the 18th International Conference on Optical Fiber Sensors (OFS18), October 23-27, 2006, Cancún, México.

[2006-26]

Luyckx, G., De Waele, W., Van Paepegem, W., Degrieck, J., Vlekken, J. and Van Damme, S. (2006). Multi-axial fiber bragg sensors for monitoring purposes. SAMPE Benelux meeting, 21 November 2006, Sabena Technics, Brussels, Belgium. Invited presentation.

[2007-27]

De Baere, I., Voet, E., Luyckx, G., Van Paepegem, W., Vlekken, J., Cnudde, V., Masschaele, B. and Degrieck, J. (2007). On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions. Proceedings of the Third international workshop on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2007), May 28-30, 2007, Leuven, Belgium.

[2007-28]

Luyckx, G., De Baere, I., De Waele, W., Degrieck, J., Van Paepegem, W., Vlekken, J. and Verbeke, T. (2007). Analysis of a curved composite test specimen with Fibre Bragg Gratings. Proceedings of the Third international workshop on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2007), May 28-30, 2007, Leuven, Belgium.

[2007-29]

Van Paepegem, W., De Pauw, S., Shulev, A., Roussev, I., Degrieck, J., Sainov, V. (2007). Study of the deformation characteristics of window security film with optical techniques. Proceedings of the Third international workshop on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2007), May 28-30, 2007, Leuven, Belgium.

[2007-30]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2007). Leaky Rayleigh waves propagating around the corner of a thick solid plate : Finite element analysis. Proceedings of the 153rd meeting of the Acoustical Society of America, 4-8 June 2007 Salt Lake City, Utah, USA.

[2007-31]

Lamkanfi, E., Ramault, C., Makris, A., Van Paepegem, W., Degrieck, J., Van Hemelrijck, D. and Sol, H. (2007). Experimental and theoretical study of the damage onset in biaxial cruciform specimens under static and hysteresis loading. Proceedings of the 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece, 1-6 July, 2007.

[2007-32]

Makris, A., Ramault, C., Smits, A., Van Hemelrijck, D., Clarke, A., Williamson, C., Gower, M., Shaw, R., Mera, R., Lamkanfi, E. and Van Paepegem, W. (2007). A review of biaxial test methods for composites. Proceedings of the 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece, 1-6 July, 2007.

[2007-33]

Ramault, C., Makris, A., Smits, A., Lecompte, D., Van Hemelrijck, D., Sol, H. and Van Paepegem, W. (2007). Inverse method for parameter determination of biaxially loaded cruciform composite specimens. Proceedings of the 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece, 1-6 July, 2007.

[2007-34]

Van Hemelrijck, D., Ramault, C., Makris, A., Clarke, A., Williamson, C., Gower, M., Shaw, R., Mera, R., Lamkanfi, E. and Van Paepegem, W. (2007). Biaxial testing of fibre reinfored composites. Proceedings of the 16th International Conference on Composite Materials (ICCM-16), Kyoto, Japan, July 8-13, 2007.

[2007-35]

Kakogiannis, D., De Wolf, K., Palanivelu, S., Van Hemelrijck, D., Vantomme, J. and Van Paepegem, W. (2007). Blast loading response of typical steel cans. Proceedings of the International Conference on Structural Analysis of Advanced Materials (ICSAM – 2007), Patras, Greece, September 2-6, 2007. Poster presentation.

[2007-36]

Van Hemelrijck, D., Makris, A., Ramault, C., Lamkanfi, E. and Van Paepegem, W. (2007). Towards the characterization of biaxial material performance. Proceedings of the International Conference on Structural Analysis of Advanced Materials (ICSAM – 2007), Patras, Greece, September 2-6, 2007. Keynote lecture.

[2007-37]

De Strycker, M., Vanden Hautte, K., Debruyne, D. and Van Paepegem, W. (2007). Simulating the plastic bending of innovative tube connections. Proceedings of the Ninth International Conference on Computational Plasticity (COMPLAS 2007), Barcelona, Spain, 5-7 September 2007.

[2007-38]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2007). Electrical resistance measurement for in-situ monitoring of fatigue of carbon fabric composites. Proceedings of the Fourth International Conference on Fatigue of Composites (ICFC’04), Kaiserslautern, Germany, 26-28 September 2007.

[2007-39]

Van Paepegem, W., De Baere, I., Lamkanfi, E. and Degrieck, J. (2007). Monitoring fatigue damage in fibre-reinforced plastics through the Poisson’s ratio degradation. Proceedings of the Fourth International Conference on Fatigue of Composites (ICFC’04), Kaiserslautern, Germany, 26-28 September 2007.

[2007-40]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2007). Comparison of different set-ups for fatigue testing of thin composite laminates in bending. Proceedings of the International Conference on Damage Tolerance of Aircraft Structures (DTAS 2007), Delft, The Netherlands, 25-28 September 2007.

[2007-41]

De Smet, P., De Kinder, J., Van Paepegem, W. and Degrieck, J. (2007). Experimental evaluation of fracture matching methods based on 3D imaging techniques. Proceedings of the 15th International Forensic Science Symposium (IFSS), ICPO-Interpol General Secretariat, Lyon, October 23-26, 2007.

[2007-42]

De Strycker, M., Vanden Hautte, K., Debruyne, D. and Van Paepegem, W. (2007). Developing Innovative Tube Connections with the Aid of Finite Element Analysis. SIMULIA/Abaqus Benelux Users’ meeting 2007, Hoeven, The Netherlands, November 19-20, 2007.

[2007-43]

De Strycker, M., Vanden Hautte, K., Debruyne, D. and Van Paepegem, W. (2007). Lasergesneden buizen: zo eenvoudig het concept, zo onuitputtelijk de toepassingen. KVIV-FABI-WTCB-OCW Symposium "Mooi bedacht, nuttig toegepast", KMS-RMA Brussel, 28 November 2007.

[2007-44]

De Strycker, M., Vanden Hautte, K., Debruyne, D. and Van Paepegem, W. (2007). Laser cutting of tubes: possibilities in lightweight structures. Proceedings of the XIII International Conference on Lightweight Structures in Civil Engineering (LSCE 2007), Warsaw, Poland, 7 December 2007.

[2008-45]

De Strycker, M., Vanden Hautte, K., Debruyne, D. and Van Paepegem, W. (2008). Effect of bending radius on plastic deformation in a combined cut-bent tube connection. Proceedings of the International Symposium on Plasticity 2008, Kailua/Kona, Hawaii, January 3-8, 2008.

[2008-46]

De Baere, I., Van Paepegem, W., Voet, E. and Degrieck, J. (2008). Fatigue testing of carbon fabric thermoplastics: different testing and instrumentation strategies. Proceedings of SEICO 08 – SAMPE EUROPE 29th International Conference and Forums, Paris Porte de Versailles Expo, France, 31 March – 2 April, 2008. Invited presentation.

[2008-47]

Van Paepegem, W., Shulev, A., Degrieck, J. and Sainov, V. (2008). Real-time measurement of the deformation of thermoplastic composite plates under bird strike impact. Proceedings of SEICO 08 – SAMPE EUROPE 29th International Conference and Forums, Paris Porte de Versailles Expo, France, 31 March – 2 April, 2008. Invited presentation.

[2008-48]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2008). Finite element study on the traveling of Leaky Rayleigh waves around the extremity of a thick fluid-loaded solid plate. Proceedings of the 10th School on Acousto-optics and Applications, Gdansk-Sopot, Poland, 12-15 May 2008.

[2008-49]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2008). Numerical evidence of the tunneling of Rayleigh waves beneath a reflective sound barrier by use of the finite element method. Proceedings of the XI International Conference For Young Researchers on Wave Electronics and Its Applications in Information and Telecommunication Systems, St. Petersburg, Russia 25-30 May 2008.

[2008-50]

De Smet, P., Van Paepegem, W., Degrieck, J. and De Kinder, J. (2008). Fracture matching of broken utility knives using 3D imaging. Proceedings of the Shoeprints and Toolmarks meeting (SPTM 2008) - Expert Working Group on Marks (EWGM), Madrid, Spain, 27-29 May, 2008.

[2008-51]

Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2008). Biaxial fatigue testing using cruciform composite specimens. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-52]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2008). Strain distribution in a biaxially loaded cruciform composite specimen. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-53]

Blommaert, C., Degrieck, J. and Van Paepegem, W. (2008). Design of composite material for cost effective large scale production of components for floating offshore structures. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-54]

Kakogiannis, D., Van Hemelrijck, D., Wastiels, J., Palanivelu, S., Van Paepegem, W., De Wolf, K. and Vantomme, J. (2008). Experimental and numerical study of the energy absorption capacity of pultruded composite tubes. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-55]

Lamkanfi, E., Van Paepegem, W., Degrieck, J., Makris, A., Ramault, C. and Van Hemelrijck, D. (2008). Geometrical influence on the strain distribution in biaxial composite specimens. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-56]

Palanivelu, S., Verhelst, R., Van Paepegem, W., Degrieck, J., Kakogiannis, D., Van Hemelrijck, D., Wastiels, J., De Wolf, K. and Vantomme, J. (2008). Experimental and numerical study on axial crushing behaviour of pultruded composite tubes. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-57]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2008). Comparison of different setups for fatigue testing of thin composite laminates in bending. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-58]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2008). Design of a modified three-rail shear test for shear fatigue of composites. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008.

[2008-59]

Van Paepegem, W. (2008). My research on composites: a matrix of fascination reinforced with fibres of dedication. Proceedings of the 13th European Conference on Composite Materials (ECCM-13), Stockholm, Sweden, 2-5 June, 2008. Invited plenary lecture.

[2008-60]

Kakogiannis, D., De Wolf, K., Palanivelu, S., Van Hemelrijck, D., Vantomme, J. and Van Paepegem, W. (2008). Blast Loading Response of Typical Coca-Cola Cans. Proceedings of the International Conference on Impact Loading of Lightweight Structures. Trondheim, Norway, 17-19 June 2008.

[2008-61]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2008). Finite element simulation of the linear and nonlinear interaction of progressive acoustic waves with a standing acoustic wave field. Proceedings of the second ASA-EAA joint conference Acoustics’08, Paris, France, 29 June – 4 July 2008.

[2008-62]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2008). Conversion of a Scholte - Stoneley wave at the extremity of a fluid loaded plate : comparison between finite element method, radiation mode theory and experiments. Proceedings of the second ASA-EAA joint conference Acoustics’08, Paris, France, 29 June – 4 July 2008.

[2008-63]

Han, G., Degrieck, J., Van Paepegem, W., Xiao-xiong, J., Wei-ping, Y. and Wei-fang, C. (2008). Research on Internal Combustion Engine Sound Reduction Based on Uncertainty Theory. Proceedings of INTER-NOISE 2008, the 37th International Congress and Exposition on Noise Control Engineering, Shanghai, China, 26-29 October 2008.

[2008-64]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2008). Finite element study of near edge Lamb wave excitation and mode conversion in plates. 17th National Symposium on Ultrasonics NSU-XVII, Varanasi, India, 4-6 December 2008.

[2008-65]

Lamkanfi, E., Declercq, N.F., Van Paepegem, W. and Degrieck, J. (2008). Use of the finite element method in the investigation of diffraction effects at the extremity of solid plate for Rayleigh and Scholte-Stoneley waves. 17th National Symposium on Ultrasonics NSU-XVII, Varanasi, India, 4-6 December 2008. Invited presentation.

[2009-66]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Blast energy absorption of recyclable beverage cans and composite tubes for sacrificial cladding structures. Proceedings of the Deformation and Fracture of Composites Conference (DFC10), Sheffield University, Sheffield, United Kingdom, 15-17 April 2009.

[2009-67]

Rah, K., Van Paepegem, W., Habraken, A.M., de Sousa, R. and Valente, R. (2009). Evaluation of different advanced finite element concepts for detailed stress analysis of laminated composite structures. Proceedings of the 12th International ESAFORM Conference on Material Forming (ESAFORM 2009), University of Twente, The Netherlands, 27-29 April, 2009.

[2009-68]

Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2009). Progressive damage modelling of FRP cruciform type specimens under biaxial loading conditions. Proceedings of the 8th National Congress on Theoretical and Applied Mechanics (NCTAM2009), Brussels, Belgium, 28-29 May 2009.

[2009-69]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2009). Design and production of cruciform composite specimens for in-plane biaxial tests. Proceedings of the 8th National Congress on Theoretical and Applied Mechanics (NCTAM2009), Brussels, Belgium, 28-29 May 2009.

[2009-70]

Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E., Van Paepegem, W. and Philippidis, T. (2009). Biaxial Failure Envelopes for Glass Fibre Reinforced Composite Laminates. Proceedings of the SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Hyatt Regency Albuquerque, Albuquerque, New Mexico USA, June 1 - 4, 2009.

[2009-71]

Ramault, C., Makris, A., Sol, H., Van Hemelrijck, D., Lecompte, D., Lamkanfi, E. and Van Paepegem, W. (2009). Development of an Inverse Method for Material Characterization using a Biaxially Loaded Cruciform Composite Specimen. Proceedings of the SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Hyatt Regency Albuquerque, Albuquerque, New Mexico USA, June 1 - 4, 2009.

[2009-72]

Kakogiannis, D.A., Van Hemelrijck, D., Wastiels, J., Van Ackeren, J., Palanivelu, S., Van Paepegem, W., Vantomme, J., Nurick, G.N. and Chung Kim Yuen, S. (2009). Experimental and Numerical Study of the Energy Absorption Capacity of Pultruded Tubes Under Blast Load. Proceedings of the SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Hyatt Regency Albuquerque, Albuquerque, New Mexico USA, June 1 - 4, 2009.

[2009-73]

Van Paepegem, W., Palanivelu, S., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Energy absorption of composite tubes: Experimental testing and finite element modelling. SAMPE Benelux Spring seminar, June 2, 2009, Enschede, The Netherlands.

[2009-74]

Degroote, J., Blommaert, C., Haelterman, R., Van Paepegem, W. and Vierendeels, J. (2009). Partitioned simulation of the impact of a deformable circular cylinder on a water surface. Proceedings of the 3rd International Conference on Computational Methods for Coupled Problems in Science and Engineering, Ischia Island, Italy, 8-10 June 2009.

[2009-75]

Van Paepegem, W., De Baere, I. and Degrieck, J. (2009). Fatigue testing of carbon fabric thermoplastics: different set-ups and instrumentation strategies. Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009. Invited presentation.

[2009-76]

Rezaei, A., Ost, W., Van Paepegem, W., Degrieck, J. and De Baets, P. (2009). Experimental and numerical study of the large-scale testing of filament wound composite bearings. Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009. Invited presentation.

[2009-77]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2009). Effect of tab design on the strain distribution of a biaxially loaded cruciform composite specimen. Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-78]

Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2009). Damage evolution on composite cruciform specimens under quasi-static biaxial loading. Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-79]

Kakogiannis, D.A., Van Hemelrijck, D., Van Ackeren, J., Wastiels, J., Palanivelu, S., Van Paepegem, W., Vantomme, J. and Nurick, G.N. (2009). Experimental and numerical study of pultruded composite tubes under blast loading. Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-80]

Xu, J., Lomov, S.V., Verpoest, I., Daggumati, S., Van Paepegem, W. and Degrieck, J. (2009). A New Meso-scale Modelling of Static and Fatigue Damage in Woven Composite Materials with Finite Element Method. Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-81]

Blommaert, C., Van Paepegem, W., Dhondt, P., De Backer, G., Degrieck, J., De Rouck, J., Vantorre, M., Van Slycken, J., De Baere, I., De Backer, H., Degroote, J., Vierendeels, J., De Pauw, P., Matthys, S. and Taerwe, L. (2009). Large scale slamming tests on composite buoys for wave energy applications. Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-82]

Daggumati, S., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V. and Verpoest, I. (2009). Meso-scale modelling in thermoplastic 5-harness satin weave composite. Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-83]

Lamkanfi, E., Van Paepegem, W., Degrieck, J., Makris, A., Ramault, C. and Van Hemelrijck, D. (2009). Optimization of a cruciform composite specimen under biaxial loading by means of an evolutionary algorithm. Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-84]

De Baere I., Van Paepegem W and Degrieck J. (2009). Fusion Bonding of Carbon Fabric Reinforced Polyphenylene Sulphide by Hot-Tool Welding. Proceedings of the 17th International Conference on Composite Materials (ICCM-17), 27-31 July 2009, Edinburgh, United Kingdom.

[2009-85]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D., Wastiels, J., De Wolf, K. and Vantomme, J. (2009). Numerical energy absorption study of composite tubes for axial impact loadings. Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-86]

Van Ackeren, J., Blom, J., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D., Palanivelu, S., Van Paepegem, W., Degrieck, J. and Vantomme, J. (2009). Strain rate dependency of Textile Reïnforced cements under static loading, Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, United Kingdom, 27-31 July 2009.

[2009-87]

Han, G., Degrieck, J., Van Paepegem, W., Jin, X. and Hou, Y. (2009). Active noise control in three dimension enclosure using piezoceramics. Proceedings of the 2009 International Symposium on Active Control of Sound and Vibration (ACTIVE 2009), August 20-22, 2009, Ottawa, Canada.

[2009-88]

Van Paepegem, W., Rezaei, A., Ost, W., De Baets, P., Zsidai, L. and Kalacska, G. (2009). Numerical and experimental analysis of friction of large scale self lubricating radial bearings. International Conference "Synergy and Technical Development", Gödöllö, Hungary, August 30-September 3, 2009.

[2009-89]

De Strycker, M., Debruyne, D., Van Paepegem, W. and Schueremans, L. (2009). Welding of cold-rolled steel tubes: FEA and sensitivity of input parameters. Proceedings of the Tenth International Conference on Computational Plasticity (COMPLAS X), 2-4 September 2009, Barcelona, Spain.

[2009-90]

Makris, A., Ramault, C., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2009). Damage assessment of carbon-epoxy cross ply cruciform type specimens under biaxial loading conditions. Proceedings of the 7th EUROMECH Solid Mechanics Conference (ESCM7), September 7-11, 2009, Instituto Superior Técnico, Lisbon, Portugal.

[2009-91]

Han, G., Degrieck, J., Van Paepegem, W., Jin, X. and Hou, Y. (2009). Performance of Fiber-Reinforced Piezoelectric Sandwich Structures. Proceedings of the Tenth Western Pacific Acoustics conference (WESPAC X), 21-23 September 2009, Beijing, China.

[2009-92]

Van Paepegem, W., De Baere, I. and Degrieck, J. (2009). Fatigue and Impact Testing of Textile Reinforced Thermoplastic Composites for Aerospace Applications. Proceedings of the International Conference "Latest Advances in High Tech Textiles and Textile-Based Materials - 80 years Department of Textiles", 23-25 September 2009, Het Pand, Ghent, Belgium.

[2009-93]

Rezaei, A., Verhelst, R., Van Paepegem, W. and Degrieck, J. (2009). Development of a FE model for oblique soccer ball bounce on artificial turf. Proceedings of the International Conference "Latest Advances in High Tech Textiles and Textile-Based Materials - 80 years Department of Textiles", 23-25 September 2009, Het Pand, Ghent, Belgium.

[2009-94]

Van Paepegem, W., Blommaert, C., Degrieck, J., De Backer, G., De Rouck, J., Degroote, J., Vierendeels, J., Matthys, S. and Taerwe, L. (2009). Slamming wave impact of a composite buoy for wave energy applications: design and large-scale testing. Proceedings of the Ninth International Seminar on Experimental Techniques and Design in Composite Materials (ETDCM 9), Vicenza, Italy, September 30-October 2, 2009

[2009-95]

Lamkanfi, E., Van Paepegem, W., Degrieck, J., Makris, A., Ramault, C. and Van Hemelrijck, D. (2009). Topology optimization of a cruciform composite specimen under biaxial loading by means of evolutionary algorithms and DIC measurements. Proceedings of the Ninth International Seminar on Experimental Techniques and Design in Composite Materials (ETDCM 9), Vicenza, Italy, September 30-October 2, 2009

[2009-96]

Van Ackeren, J., Blom, J., Belkassem, B., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D., Palanivelu, S., Van Paepegem, W., Degrieck, J. and Vantomme, J. (2009). Impact study of Textile Reinforced Cementitious materials: test method and experimental results, Proceedings of the 9th Conference on Brittle Matrix Composites (BMC-9), Warsaw, Poland, 25-28 Oktober 2009.

[2009-97]

Van Paepegem, W., Palanivelu, S., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Numerical energy absorption study of pultruded composite tubes. Simulia Benelux Users’ meeting, November 11-12, 2009, Landgraaf, The Netherlands. Best Presentation Award.

[2009-98]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Vantomme, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D. and Wastiels, J. (2009). Blast energy absorption of recyclable beverage cans. Simulia Benelux Users’ meeting, November 11-12, 2009, Landgraaf, The Netherlands.

[2010-99]

Gu, J., Sol, H. and Van Paepegem, W. (2010). Resonance fatigue testing of test beams made of composite material. Proceedings of the Eleventh Pan-American Congress of Applied Mechanics (PACAM XI), January 04 - 08, 2010, Foz do Iguaçu, Paraná – Brasil.

[2010-100]

Van Paepegem, W. (2010). Mechanics simulations with Abaqus @ UGent-MMS. Abaqus Academic Seminar, March 15, 2010, Leuven, Belgium. Invited presentation.

[2010-101]

Xu, J., Lomov, S.V., Verpoest, I., Daggumati, S., Van Paepegem, W. and Degrieck, J. (2010). Progressive fatigue damage modelling of textile composite on meso-scale with FE-method. Proceedings of the SAMPE EUROPE 31st International Technical Conference, Hotel Mercure Paris Porte de Versaille Expo, France, 12-14 April 2010.

[2010-102]

Van Ackeren, J., Blom, J., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D., Palanivelu, S., Van Paepegem, W., Degrieck, J. and Vantomme, J. (2010). Damage characterisation of a textile reinforce cement composite material under low velocity impact loading. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-103]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D., Wastiels, J. and Vantomme, J. (2010). Experimental and numerical study of the energy absorption of composite tubes for sacrificial cladding structures under blast loading. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-104]

Van Paepegem, W., Palanivelu, S., Degrieck, J., Kakogiannis, D., Van Ackeren, J., Van Hemelrijck, D., Wastiels, J. and Vantomme, J. (2010). Effect of tube geometry on the energy absorption and crushing patterns of composite tubes under quasi-static and impact loading. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-105]

Kakogiannis, D., Van Hemelrijck, D., Van Ackeren, J., Wastiels, J., Palanivelu, S., Van Paepegem, W., Degrieck, J. and Vantomme, J. (2010). Progressive crushing of pultruded tubes under quasistatic and blast loading. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-106]

Van Nuffel, D., Vepa, K.S., De Baere, I., Degrieck, J., Van Paepegem, W. and Vierendeels, J. (2010). Comparison of Slamming Wave Impact of a Rigid and Deformable Composite Cylinder with Numerical Simulation and Experimental Validation. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-107]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2010). On the nonlinear evolution of the Poisson’s ratio under quasi-static loading for a carbon fabric-reinforced thermoplastic. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-108]

Daggumati, S., Voet, E., Van Paepegem, W., Degrieck, J., Praet, T., Verhegghe, B., Xu, J., Lomov, S.V. and Verpoest, I. (2010). Evaluation of local strain profiles in a satin weave composite: experimental vs. meso-FE modelling. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-109]

Voet, E., Daggumati, S., Luyckx, G., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V. and Verpoest, I. (2010). Evaluation of local strain distribution in a satin weave composite using fibre Bragg gratings. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-110]

Jacques, S., Van Paepegem, W. and Degrieck, J. (2010). Comparative analysis of numerical strategies for simulation of delamination in advanced composites. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-111]

Xu, J., Lomov, S.V., Verpoest, I., Daggumati, S., Van Paepegem, W. and Degrieck, J. (2010). Progressive fatigue Damage Modeling of Textile Composite on Meso-Scale with Finite Element Method, Materials Characterization and Experimental Verification. Proceedings of the 14th European Conference on Composite Materials (ECCM-14), June 7-10, 2010, Budapest, Hungary.

[2010-112]

Rezaei, A., Ost, W., Van Paepegem, W., De Baets, P. and Degrieck, J. (2010). A Study on the Effect of the Clearance on the Contact Stress and Kinematics of Polymeric Composite Journal Bearings. Proceedings of the 14th Nordtrib Conference, Storforsen, Sweden, 8 - 11th June 2010.

[2010-113]

Nobre, J.P., Stiffel, J.H., Van Paepegem, W., Nau, A., Batista, A.C., Marques, M.J. and Scholtes, B. (2010). Quantifying the drilling effect during the application of incremental hole-drilling technique in laminate composites. Proceedings of the 8th European Conference on Residual Stresses (ECRS8), Riva del Garda, Italy, June 26-28, 2010.

[2010-114]

De Strycker, M., Van Paepegem, W., Schueremans, L. and Debruyne, D. (2010). Residual stresses due to the welding of cold-rolled steel tubes. Proceedings of the 8th European Conference on Residual Stresses (ECRS8), Riva del Garda, Italy, June 26-28, 2010.

[2010-115]

Vepa, K.S., Van Paepegem, W., Degroote, J. and Vierendeels, J. (2010). Numerical Investigation of Deformable Composite Structures under Slamming Loads. Proceedings of the 2nd European Seminar on Coupled Problems (ECSO 2010), June 28 — July 2, 2010, Pilsen, Czech Republic.

[2010-116]

Stoykova, E., Van Paepegem, W., Minchev, G., Ivanov, B., Degrieck, J. and Sainov, V. (2010). Speckle noise reduction in full-field stress analysis by interferometric phase-stepping implementation of the photoelastic-coating method. Proceedings of Speckle 2010, Florianopolis, Brazil, 13-15 September, 2010.

[2010-117]

De Corte, W. and Van Paepegem, W. (2010). Ultimate load capacity of commercially available bridge deck panels. COBRAE Composite Bridge Decks Expert Meeting. Utrecht, The Netherlands, September 16-17, 2010,

[2010-118]

Van Paepegem, W., De Baere, I., Daggumati, S., Luyckx, G., Dierick, M., Van Loo, D. and Cnudde, V. (2010). Modelling the (damage) mechanics of textile composites with the aid of micro-tomography measurements. UGCT seminar "X-ray tomography as a multidisciplinary research tool: Exploring new frontiers", Het Pand, Ghent, Belgium, 8 December 2010.

[2011-119]

De Strycker, M., Lava, P., Van Paepegem, W., Schueremans, L. and Debruyne, D. (2011). Measuring thermal strains during the welding of tubes with DIC. Proceedings of Photomechanics 2011, 7 - 9 February 2011, Vrije Universiteit Brussel, Brussels, Belgium.

[2011-120]

Cofaru, C., Philips, W. and Van Paepegem, W. (2011). Regularized Newton-Raphson method for small strain calculation. Proceedings of Photomechanics 2011, 7 - 9 February 2011, Vrije Universiteit Brussel, Brussels, Belgium.

[2011-121]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Van Ackeren, J., Kakogiannis, D., Wastiels, J., Van Hemelrijck, D. and Vantomme, J. (2011). Application of digital image correlation technique for measuring dynamic parameters during impact loading. Proceedings of Photomechanics 2011, 7 - 9 February 2011, Vrije Universiteit Brussel, Brussels, Belgium.

[2011-122]

Peirs, J., Verleysen, P., Van Paepegem, W. and Degrieck, J. (2011). The use of DIC for high strain rate material testing. Proceedings of Photomechanics 2011, 7 - 9 February 2011, Vrije Universiteit Brussel, Brussels, Belgium.

[2011-123]

Daggumati, S., Voet, E., Van Paepegem, W., Degrieck, J., Praet, T., Verhegghe, B., Xu, J., Lomov, S.V. and Verpoest, I. (2011). Local strain variation in the plies of a satin weave composite: experimental vs. numerical. Proceedings of Photomechanics 2011, 7 - 9 February 2011, Vrije Universiteit Brussel, Brussels, Belgium.

[2011-124]

Stoykova, E., Van Paepegem, W., Liubenova, T., Ivanonv, B., Degrieck, J. and Sainov, V. (2011). Speckle noise reduction in full-field stress analysis by interferometric phase-stepping implementation of the photoelastic-coating method. Proceedings of Photomechanics 2011, 7 - 9 February 2011, Vrije Universiteit Brussel, Brussels, Belgium.

[2011-125]

Ramault, C., Makris, A., Van Hemelrijck, D., Lamkanfi, E. and Van Paepegem, W. (2011). Determination of stresses in a biaxially loaded cruciform composite specimen. Proceedings of Photomechanics 2011, 7 - 9 February 2011, Vrije Universiteit Brussel, Brussels, Belgium.

[2011-126]

De Baere, I., Van Paepegem, W., Daggumati, S., Lapeire, L., Verbeken, K. en Degrieck, J. (2011). On the (fatigue) damage behaviour of a carbon-reinforced PPS. Proceedings of the 11th Deformation and Fracture of Composites (DFC-11) and 5th Structural Integrity of Composite Materials (SI-5), 13-15 April 2011, Cambridge, United Kingdom. p. 1-15.

[2011-127]

Vepa, K.S., Van Nuffel, D. and Van Paepegem W. (2011). Pressure predictions during water entry of a 2D rigid cylinder using SPH method. Proceedings of the 26th International Workshop on Water Waves and Floating Bodies (IWWWFB 2011), 17-20 April 2011, Athens, Greece. p. 1-4.

[2011-128]

Van Nuffel, D., Vepa, K.S., De Baere, I., Degrieck, J., De Rouck, J. and Van Paepegem, W. (2011). Parameters affecting the pressure measurement on the surface of a rigid cylindrical body during water slamming impact. Proceedings of the 26th International Workshop on Water Waves and Floating Bodies (IWWWFB 2011), 17-20 April 2011, Athens, Greece. p. 193-196.

[2011-129]

Vepa, K.S., Van Nuffel, D., Van Paepegem, W., Degroote, J. en Vierendeels, J. (2011). Comparative study of slamming loads on cylindrical structures. Proceedings of the 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2011), 19-24 June 2011, Rotterdam, The Netherlands. p. 1-8.

[2011-130]

Van Nuffel, D., Vepa, K.S., De Baere, I., Degrieck, J., De Rouck, J. and Van Paepegem, W. (2011). Pressure measurement on the surface of a rigid cylindrical body during slamming wave impact. Proceedings of the 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2011), 19-24 June 2011, Rotterdam, The Netherlands. p. 1-10.

[2011-131]

Vepa, K.S., Van Nuffel, D., Van Paepegem W. and Degrieck, J. (2011). Numerical study of composite structures subjected to slamming loads using Smoothed Particle Hydrodynamics (SPH). Proceedings of the 8th International Conference on Structural Dynamics (Eurodyn 2011), 4-6 July 2011, Leuven, Belgium. p. 1-6.

[2011-132]

Degroote, J., Vierendeels, J., Vepa, K.S. and Van Paepegem, W. (2011). Fluid-structure interaction simulation of the breaking wave slamming on an absorber for a wave-energy converter. Proceedings of the 8th International Conference on Structural Dynamics (Eurodyn 2011), 4-6 July 2011, Leuven, Belgium. p. 1-8.

[2011-133]

Palanivelu, S., Van Paepegem, W., Degrieck, J., Reymen, B., Ndambi, J.M., Segers, E., Vantomme, J., Van Ackeren, J., Kakogiannis, D., Wastiels, J. and Van Hemelrijck, D. (2011). Performance of sacrificial cladding structure made of empty recyclable metal beverage cans under large-scale air blast load. Proceedings of the Third International Workshop on Performance, Protection & Strengthening of Structures under Extreme Loading (Protect 2011), 30 August – 1 September 2011, Palazzo dei Congressi, Lugano, Italy. p. 416-421.

[2011-134]

Nila, A., Vanlanduit, S., Vepa, K.S., Van Nuffel, D., Van Paepegem, W., Degroote, J. and Vierendeels, J. (2011). High speed partical image velocimetry measurements during water entry of rigid bodies. Proceedings of the 9th International symposium on particle image velocimetry, 21-23 July 2011, Kobe, Japan. p. 1-5.

[2011-135]

De Strycker, M., Van Paepegem, W., Schueremans, L. and Debruyne, D. (2011). The effect of residual stresses on the strain evolution during welding of thin-walled tubes. Proceedings of the 14th International Conference on Sheet Metal (SheMet 2011), 18-20 April 2011, Leuven, Belgium. p. 1-6.

[2011-136]

De Strycker, M., Van Paepegem, W., Debruyne, D. and Schueremans, L. (2011). Residual stress calculation in cold-rolled steel tubes with FEA validation of the strain evolution. Proceedings of EUROSTEEL 2011, August 31 - September 2, 2011, Budapest, Hungary. p. 1-6.

[2011-137]

De Strycker, M., Lava, P., Van Paepegem, W., Schueremans, L. and Debruyne, D. (2011). Validation of welding simulations using thermal strains measured with DIC. Proceedings of the International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation (ISEV), 7-9 September 2011, The Royal College of Physicians, Edinburgh, United Kingdom. p. 1-6.

[2011-138]

De Baere, I., Lapeire, L., Van Paepegem, W., Daggumati, S., Verbeken, K. and Degrieck, J. (2011). Macro-mechanical and microscopic study of the fatigue damage behaviour of a carbon fabric/PPS thermoplastic composite. Proceedings of the SAMPE Europe Technical Conference (SETEC 11), 14-16 September 2011, Hotel Holiday Inn, Leiden, The Netherlands. p. 1-8.

[2011-139]

Kersemans, M., Van Paepegem, W., Zastavnik, F., Gu, J., Sol, H. and Degrieck, J. (2011). Nondestructive characterization of the elastic properties of orthotropic composites with ultrasound. Proceedings of the SAMPE Europe Technical Conference (SETEC 11), 14-16 September 2011, Hotel Holiday Inn, Leiden, The Netherlands. p. 1-8.

[2011-140]

Daggumat, S., Voet, E., De Baere, I., Van Paepegem, W., Degrieck, J., Xu, J., Lomov, S.V. and Verpoest, I. (2011). In-situ local strain measurement in textile composites with embedded optical fibre sensors. Proceedings of the 5th International Conference on Emerging Technologies in Non-Destructive Testing (ETNDT5), 19-21 September 2011, Ioannina, Greece. p. 1-6.

[2011-141]

De Baere, I., Van Paepegem, W., Lammens, N., Lava, P., Debruyne, D., Cofaru, C., Philips, W. and Degrieck, J. (2011). Experimentally induced errors in Digital Image Correlation measurement of small strains with large gradients. Proceedings of the 5th International Conference on Emerging Technologies in Non-Destructive Testing (ETNDT5), 19-21 September 2011, Ioannina, Greece. p. 1-6.

[2011-142]

Kersemans, M., Van Paepegem, W., Degrieck, J., Zastavnik, F., Gu, J. and Sol, H. (2011). Experimental and Numerical Polar Scans of Several Anisotropic materials using Pulsed and Harmonic Ultrasonic Beams. Proceedings of the 5th International Conference on Emerging Technologies in Non-Destructive Testing (ETNDT5), 19-21 September 2011, Ioannina, Greece. p. 1-6.

[2012-143]

Lava, P., Van Paepegem, W., Coppieters, S., De Baere, I. and Debruyne, D. (2012). Accurate measurement of high strain gradients in micro-strain applications with digital image correlation. Proceedings of the 5th International Conference on Optical Measurement Techniques for Structures and Systems (OPTIMESS 2012), 4-5 April 2012, Antwerp, Belgium. p. 1-9.

[2012-144]

Jain, A., Verpoest, I., Hack, M., Lomov, S., Adam, L. and Van Paepegem, W. (2012). Fatigue life simulation on fiber reinforced composites – overview and methods of analysis for the automotive industry. SAE World congress, 24-26 April 2012, Cobo Center, Detroit, Michigan, USA. p. 1-13.

[2012-145]

Lava, P., Coppieters, S., Debruyne, D., Van Paepegem, W. and De Baere, I. (2012). Impact of lens distortions on strain measurements obtained with digital image correlation. SEM 2012 International Congress and Exposition on Experimental and Applied Mechanics, June 11-14, 2012, Hilton Orange County, Costa Mesa, California, USA. p. 1-6.

[2012-146]

Allaer, K., De Baere, I., Jacques, S., Van Paepegem, W. and Degrieck, J. (2012). Assessment of the infrared welding process for a carbon fabric reinforced PPS. Proceedings of the 15th European Conference on Composite Materials (ECCM-15), 24-28 June 2012, Venice, Italy. p. 1-8.

[2012-147]

De Baere, I., Van Paepegem, W. and Degrieck, J. (2012). Influence of specimen geometry on the fatigue behaviour of a carbon fabric reinforced PPS. Proceedings of the 15th European Conference on Composite Materials (ECCM-15), 24-28 June 2012, Venice, Italy. p. 1-8.

[2012-148]

Lammens, N., Luyckx, G., Van Paepegem, W. and Degrieck, J. (2012). A finite element model capable of predicting resin pockets for arbitrary inclusions in composite laminates. Proceedings of the 15th European Conference on Composite Materials (ECCM-15), 24-28 June 2012, Venice, Italy. p. 1-6.

[2012-149]

Nobre, J.P., Batista, A.C., Nau, A., Van Paepegem, W. and Scholtes, B. (2012). Using the Incremental Hole-drilling Technique for Measuring Residual Stresses in Fibre-Reinforced Polymer Composites. Proceedings of the 15th European Conference on Composite Materials (ECCM-15), 24-28 June 2012, Venice, Italy. p. 1-8.

[2012-150]

Rezaei, A., Rombouts, P., Van Paepegem, W., De Baets, P., Degrieck, J. and Weyten, L. (2012. Using capacitors in predictive condition monitoring of laminated polymer composite bearings. Proceedings of the 15th European Conference on Composite Materials (ECCM-15), 24-28 June 2012, Venice, Italy. p. 1-8.

[2012-151]

Van Paepegem, W., Palanivelu, S., Degrieck, J., Vantomme, J., Reymen, B., Kakogiannis, D., Van Hemelrijck, D. and Wastiels, J. (2012). Large-scale blast loading of a composite tube array for protection of civil engineering structures. Proceedings of the 15th European Conference on Composite Materials (ECCM-15), 24-28 June 2012, Venice, Italy. p. 1-8.

[2012-152]

Van Nuffel, D., Vepa, K.S., De Baere, I., De Rouck, J., Degrieck, J. and Van Paepegem, W. (2012). Experimental study on the impact loads acting on a horizontal rigid cylinder during vertical water entry. Proceedings of the 31th International conference on Ocean, Offshore and Arctic Engineering (OMAE 2012), 1-6 July 2012, Rio de Janeiro, Brazil. p. 1-10.

[2012-153]

Vepa, K.S., Van Nuffel, D., Van Paepegem, W. and Degrieck, J. (2012). Fully coupled time domain modelling of 3D floating bodies and mooring systems in regular and irregular sea states. Proceedings of the 31th International conference on Ocean, Offshore and Arctic Engineering (OMAE 2012), 1-6 July 2012, Rio de Janeiro, Brazil. p. 1-6.

[2012-154]

Nila, A., Vanlanduit, S., Vepa, S., Van Nuffel, D., Van Paepegem, W., Degroote, J. and Vierendeels, J. (2012). High Speed Particle Image Velocimetry Measurements During Water Entry of Rigid and Deformable Bodies. Proceedings of the 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 9-12 July 2012, Lisbon, Portugal. p. 1-4.

[2012-155]

Allaer, K., De Baere, I., Jacques, S., Van Paepegem, W. and Degrieck, J. (2012). Experimental assessment of infrared welded bonds using lapshear, Double Cantilever Beam and End Notch Flexure tests for a carbon fabric reinforced thermoplastic. Proceedings of the 15th International Conference on Experimental Mechanics (ICEM-15), 22-27 July 2012, Porto, Portugal. p. 1-9.

[2012-156]

De Baere, I., Jacques, S., Kersemans, M., Van Paepegem, W. and Degrieck, J. (2012). Experimental study of the crack growth of a carbon fabric reinforced PPS under mode I and mode II loading conditions. Proceedings of the 15th International Conference on Experimental Mechanics (ICEM-15), 22-27 July 2012, Porto, Portugal. p. 1-11.

[2012-157]

Kersemans, M., Van Den Abeele, K., De Baere, I., Van Paepegem, W. and Degrieck, J. (2012). Implications of structural discontinuities for water coupled NDT and SHM: experiment and modelling. Proceedings of the 15th International Conference on Experimental Mechanics (ICEM-15), 22-27 July 2012, Porto, Portugal. p.1-11.

[2012-158]

Kersemans, M., Van Paepegem, W., Van Nuffel, D., Luyckx, G., De Baere, I., Zastavnik, F., Gu, J., Sol, H., Van Den Abeele, K. and Degrieck, J. (2012). Polar scan technique for material characterization and identification of new operating regimes. Proceedings of the 15th International Conference on Experimental Mechanics (ICEM-15), 22-27 July 2012, Porto, Portugal. p. 1-12.

[2012-159]

Van Nuffel, D., Peirs, J., De Baere, I., Verleysen, P., Degrieck, J. and Van Paepegem, W. (2012). Calibration of dynamic piezoelectric force transducers using the Hopkinson bar technique. Proceedings of the 15th International Conference on Experimental Mechanics (ICEM-15), 22-27 July 2012, Porto, Portugal. p. 1-12.

[2012-160]

Vanwalleghem, J., De Baere, I., Loccufier, M. and Van Paepegem, W. (2012). Practical aspects in measuring vibration damping of materials. Proceedings of the 15th International Conference on Experimental Mechanics (ICEM-15), 22-27 July 2012, Porto, Portugal. p. 1-10.

[2012-161]

Vanwalleghem, J., Mortier, F., De Baere, I., Loccufier, M. and Van Paepegem, W. (2012). Instrumentation of a racing bicycle for outdoor field testing and evaluation of the cyclist's comfort perception. Proceedings of the 15th International Conference on Experimental Mechanics (ICEM-15), 22-27 July 2012, Porto, Portugal. p. 1-12.

[2012-162]

Fazeli, M., Kleicke, R., Cherif, C. and Van Paepegem, W. (2012). High-performance lightweight multifunctional composites based on 3D-shaped multilayered woven fabrics. Proceedings of the 4th World conference on 3D Fabrics and their applications, 10-11 September, 2012, Aachen, Germany. p. 1-12.

[2012-163]

De Baere, I., Allaer, K., Van Paepegem, W. and Degrieck, J. (2012). Fatigue behaviour of infrared welded joints in fibre reinforced thermoplastics. Proceedings of the 10th International conference on durability of composite systems (Duracosys 2012), 17-19 September 2012, Brussels, Belgium. p. 1-10.

[2012-164]

Pyl, L., Sol, H., Zastavnik, F., Gu, J., Van Paepegem, W. and Kersemans, M. (2012). Damage identification of prepreg composites subject to accelerated fatigue tests. Proceedings of the 10th International conference on durability of composite systems (Duracosys 2012), 17-19 September 2012, Brussels, Belgium. p. 1-10.

[2012-165]

Kersemans, M., Van Paepegem, W., Van Den Abeele, K. and Degrieck, J. (2012). Leakage and Scattering of a Leaky Lamb Wave by a Structural Discontinuity: Acousto-Optics and FEM. Proceedings of the 2012 IEEE International Ultrasonics Symposium, 7-10 October 2012, Dresden, Germany. p. 1-4.

[2012-166]

Kersemans, M., Van Paepegem, W., Lammens, N., Van Den Abeele, K., Zastavnik, F., Gun, J., Sol, H. and Degrieck, J. (2012). Gradient Polar Scan Technique for Material Characterization. Proceedings of the 2012 IEEE International Ultrasonics Symposium, 7-10 October 2012, Dresden, Germany. p. 1-4.

[2012-167]

Jain, A., Hack, M., Verpoest, I., Lomov, S., Van Paepegem, W. and Seyfarth, J. (2012). Betriebsfestigkeitsbewertung von Faserverbundwerkstoffen – Übersicht und industrielle Anwendungen. Proceedings of the 39. DVM-Tagung Arbeitskreis Betriebsfestigkeit "Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit", 10-11 October 2012, Paderborn, Germany. p. 1-16.

[2013-168]

Kersemans, M., Van Den Abeele, K., Lammens, N., Degrieck, J., Zastavnik, F., Gu, J., Pyl, L., Sol, H. and Van Paepegem, W. (2013). Determination of the fiber direction and the C-tensor of a UD carbon/epoxy composite by means of the ultrasonic polar scan. Accepted for the Proceedings of the 2013 International Congress on Ultrasonics (ICU 2013), 2-5 May 2013, Singapore.

[2013-169]

Kersemans, M., Van Paepegem, W., Degrieck, J., Van Den Abeele, K., Pyl, L., Zastavnik, F. and Sol, H. (2013). Pitfalls in experimental recording of ultrasonic polar scans for composite material characterization. Accepted for the Proceedings of the 2013 International Congress on Ultrasonics (ICU 2013), 2-5 May 2013, Singapore.